ORACLE Lighting Universal LED Wig-Wag Strobe Flasher Module

Add high-visibility flashing functionality to compatible 12-volt LED lights with the ORACLE Universal LED Wig-Wag Strobe Flasher Module. This compact, solid-state controller operates two independent lighting circuits and transforms standard LED lights into a coordinated warning-light system with selectable flash patterns. ✓ Wig-Wag & Strobe Effects ✓ Up to 1,200 Flashes Per Minute ✓ Dual Independent Outputs ✓ 3A Per Channel ✓ 6A Combined Maximum ✓ Epoxy-Sealed Solid State ✓ Universal 12V LED Compatibility Product Type: Universal LED Wig-Wag and Strobe Controller | Operating Voltage: 12V DC | Installation: Universal Hardwired Product Overview ▼ Choose from alternating wig-wag sequences, simultaneous flashes, double flashes, quad flashes, rapid strobes, and variable-speed patterns. With flash rates reaching up to 1,200 flashes per minute, the module creates an unmistakable visual signal that can help make a parked, stopped, or slow-moving vehicle more noticeable. The dual-output design supports up to 3 amps per channel, making the module ideal for controlling a pair of compatible LED reverse lights, chase lights, auxiliary lights, pods, or other 12-volt LED lighting products. Each output can be used to create left-to-right alternating effects or simultaneous flashing patterns, depending on the selected mode. A dedicated pattern-selection wire makes it easy to cycle through the available patterns using a momentary switch. Once the desired pattern is selected, the module stores the setting for convenient operation. Its compact, epoxy-sealed solid-state construction helps protect the internal electronics from moisture, dust, vibration, and the demanding conditions commonly encountered in automotive installations. Whether installed on an off-road build, work vehicle, recovery vehicle, show vehicle, or trail rig, the ORACLE Universal LED Wig-Wag Strobe Flasher Module provides a clean and versatile way to add professional-style flashing effects to compatible ORACLE LED lighting. Key Features ▼ Adds wig-wag and strobe functionality to compatible 12-volt LED lights Multiple user-selectable flash patterns Alternating and simultaneous flashing modes Double, quad, rapid-strobe, random, and variable-speed sequences Flash rates up to 1,200 flashes per minute Two independently controlled LED output channels Supports up to 3 amps per output channel 6-amp combined maximum output capacity Dedicated pattern-selection wire Compatible with an optional momentary pattern-selection switch Solid-state electronic design with no mechanical flasher contacts Epoxy-sealed construction helps resist moisture, dust, and vibration Compact flange-mount housing for discreet installation Universal design for a wide variety of automotive LED lighting applications Ideal for reverse lights, chase lights, auxiliary lights, LED pods, and warning lights Performance & Technical Specifications ▼ Product TypeUniversal LED wig-wag and strobe controller Operating Voltage12V DC Number of Outputs2 Maximum Output Per Channel3A Max Combined Output6A Max Combined Watts72 Maximum Flash RateUp to 1,200 flashes per minute Lighting Compatibility12V LED lighting Pattern SelectionMomentary + trigger wire Electronic DesignSolid state Environmental ProtectionEpoxy-sealed electronics Mounting StyleIntegrated flange mount Installation TypeUniversal hardwired Intended ApplicationsAutomotive, off-road, work, utility, recovery, and show vehicles Fitment & Suggested Applications ▼ This universal controller is designed for compatible 12V LED lighting. LED reverse lights Amber or white chase lights Auxiliary LED pods Flush-mount LED lights Grille-mounted warning lights Work and scene lights Rock lights within the module's electrical capacity Rear-facing dust, trail, or recovery lights Custom automotive LED lighting Before installation, calculate the current draw of each connected light. The total load connected to either output must not exceed 3 amps. Installation Guide & Wiring ▼ The module uses a straightforward universal wiring configuration consisting of: 12-volt positive power input Chassis ground Left or Channel 1 LED output Right or Channel 2 LED output Pattern-selection trigger wire A momentary switch may be connected to the pattern-selection wire to cycle through the available flash patterns. The module should be protected with an appropriately rated inline fuse and mounted securely away from excessive heat or moving components. Professional installation is recommended. Additional relays may be required when controlling lights that exceed the module's rated output or when integrating the flasher with a vehicle's factory lighting functions. Compatibility & Integration ▼ This module is designed to control compatible 12-volt LED lighting and should not be connected directly to lighting loads exceeding 3 amps per channel. Compatibility with factory vehicle lighting, CAN bus monitored circuits, pulse-width-modulated circuits, or multiplexed lighting systems is not guaranteed without additional interface components. For vehicles equipped with bulb-out monitoring or computer-controlled lighting, the module should be integrated on the accessory-light side of the circuit or installed using appropriate isolation relays. Do not connect the module directly to sensitive factory control-module outputs unless the circuit has been verified by a qualified installer. Legal Notice ▼ Flashing, strobing, or alternating vehicle lights may be regulated or prohibited on public roads. Certain colors and flash patterns may be restricted to authorized emergency, construction, utility, or service vehicles. The installer and vehicle operator are responsible for confirming compliance with all applicable local and state laws. Use off-road, on private property, or for show purposes where required. Badges & Install Info ▼ 12V DC3A Per Channel6A Combined MaximumEpoxy-SealedUniversal Hardwired