Clad Alignment Optical Fusion Splicer & Cleaver Kit

Description Optical Fusion Splicer & Cleaver Kit The 915FS touchscreen optical fusion splicer uses active cladding alignment technology which allows the technician to reliably fuse fiber optic cables with low splice losses. Active clad technology splicers provide a more cost-effective splicing alternative to core alignment but still provides low splice losses which is ideally suited for FTTH installations. The intuitive user interface keeps the learning curve short and enables the technician to be productive in a very short time. FTTx, P2P installations, and all standard fibers are supported with pre-qualified splicing profiles that can be modified and subsequently stored for more demanding fiber applications. The 915FS uses the Tempo Communications Splice on Connector, which provides a low loss, low return loss, and reliable connection that surpasses the failure-prone mechanical connector. Splice-on connectors also allow for easier fiber routing, which reduces fiber preparation since the splice-on connector is pre-cleaved and also eliminates the need for a splice tray. Other manufacturers’ splice-on connectors are compatible with the Tempo Communications fusion splicers with the use of an optional splice-on connector adapter. AFL Belden (contact Belden for adapter FXFSSHFM3) Corning FIS Hubbell Sumitomo Features Features Active clad four motor technology Seven-second splicing Five-second boot time 200 complete cycles per battery charge Compact and lightweight for the most demanding jobs Compatible with loose tube fibers Screenshot capable Drop tested to 76cm Eighteen-second shrink time 5,000 burns electrode life Attenuation mode capable Password protection for anti-theft Compatible with splice on connectors, SC, LC, FC, and ST IP52 compliant On-board instruction manual 5.0” Color LCD touchscreen 3-year warranty Specifications Spec Sheet Optical Fusion Splicer & Cleaver Kit Applicable Fibers SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657); EDF Fiber Cleaved Length 10mm Cladding Diameter 100 to 1000µm Fiber Count Single Fiber Aligning Method Active Clad Splice Loss (Typical) 0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB (NZDS & BIF) Splicing Mode 60 Preset / User Definable Modes Splice Time 7 seconds Boot Time 5 seconds Number of Splices Per Battery Charge 200 (including 60mm heat shrink cycle) Splice Connector SC, LC, FC, ST Arc Calibration Mode Automatic & Manual Protection Sleeve Length 60mm, 40mm, Micro Sleeves Ingress Protection IP5X (Dust); IPX2 (Water) Storage of Splice Results 5,000 Results, 100 screenshots Drop Test 76cm on five axis Tension Test 2N Fiber Display Magnification 200x Tube Heating Time 18 seconds Attenuator Mode 0.1 to 15 dB Electrode Life 5,000 Splices Display 5" Color LCD Touchscreen Connectivity USB Storage Temperature -40 to +158F (-40°C to +70°C) Operating Conditions Pressure: 0 to 16,404 feet (0 to 5,000 meters) above Sea Level Humidity: 0 to 95% Temperature: -4 to +131°F (-20°C to +55°C) Power Supply 100 to 240V AC Adapter; Li-ion Battery (4400 mAh) Power Supply 3.3lbs (1.5kg) Dimensions 4.9" x 4.9" x 5.3" (125 x 125 x 135mm) Password Protection Yes Additional Information Instruction Manual How to Reduce Fusion Splicer Loss How to Select The Correct Fusion Splicer Fusion Splicing with Loose Tube Buffer Fiber Product Videos How To Perform A Fiber Optic Fusion Splice with Your Tempo Communications 915FS and 915CL How To Safely Clean A Fusion Splicer - 915FS & FSP200 from Tempo Communications How To Check Your Fusion Splicer Using a Cell Phone How to Perform an Arc Calibration | Tempo Communications 915FS Touchscreen Fusion Splicer How to Adjust Your Fusion Splicer Screen What's in the Box What's in the Box 915FS-KIT1 Includes: 915FS Optical Fusion Splicer and 915CL Optical Fiber Cleaver Every 915FS includes: Black carrying case Tweezers Extra set of electrodes USB cable 200/250μm Adapter (Pair) 900μm Adapter (Pair) Splice on Connector oven insert 3 YEAR WARRANT Allen key Power supply with line cord Quick reference card Carrying strap Cooling tray Battery Electrode Cleaner