Omron TL-Q5MC2-Z NPN NC Inductive Probe

Compatible with Voron printers (V1, V2), and others to support bed leveling. This is "B" stock Omron Probe which saves you a considerable money over retail but works just as well.    This probe is the sourcing guide listed product. It is a better alternative to the PL-08N if you are doing the MGN12 Mod, it is also less likely to melt. Sensing head size 17 mm x 17 mm x 28 mm Type Square type, Unshielded Power source DC Three-wires models Sensing distance 5 mm ±10% Setting distance 0 to 4 mm Differential distance 10% max. of sensing distance Sensing object Ferrous metal (Sensitivity lowers with non-ferrous metals.) Standard sensing object Iron 15 x 15 x 1 mm Response frequency 500 Hz (Average value) Response time 2 ms max. Power supply voltage 12 to 24 VDC ripple (p-p) 10% max. Operating voltage range 10 to 30 VDC Current consumption at 24 VDC: 10 mA max. Control output (Output type) NPN open collector Control output (Switching capacity) 50 mA max. (30 VDC max.) Control output (Residual voltage) 1 V max. (Load current 50 mA with cable length of 2 m) Indicator Detection indicator (red) Operation mode NC Protective circuit Reverse polarity protection Surge suppressor Ambient temperature (Operating) -25 to 70 ℃ Ambient temperature (Storage) -25 to 70 ℃ Ambient humidity (Operating) 35 to 95% RH Ambient humidity (Storage) 35 to 95% RH Temperature influence ±20% max. of sensing distance at 23 ℃ in the temperature range of −25 to 70 ℃ Voltage influence ±2.5% max. of sensing distance at rated voltage in the rated voltage ±10% range Insulation resistance Between charged parts and the case: 5 MΩ min. (at 500 VDC) Dielectric strength Between charged parts and the case: 500 VAC 50/60 Hz 1 min Vibration resistance Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h Shock resistance Destruction: 200 m/s2 10 times each in X, Y, and Z directions Degree of protection IEC: IP67 Connection method Pre-wired models (2 m) Weight Package: Approx. 90 g Material Case: Heat-resistant ABS resin Sensing surface: Heat-resistant ABS resin