
$13.24
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
Old Masters Oil-Based Polyurethane, Semi-Gloss, Half Pint is intended for interior use. Features Self-leveling clear finish Three available sheens Best forInterior wood; Primed metal; Fiberglass; Floors; Bars; Counters; Tabletops; Cabinets; Paneling; Doors Specs Color or finish Clear Sheen Semi-Gloss Selected size Half Pint Base oil Use interior Coverage Application text: approximately 500 sq ft/gal; TDS recommended dry film: 350 to 450 sq ft/gal at 1.5 mils Touch dry 3 hours at 70°F and 50% RH Recoat 6 hours under ideal conditions; overnight recommended Full cure Curing toward ultimate hardness during first week; light use after 24 hours; floors: avoid heavy traffic/furniture for 72 hours and rugs/cleaning for 7 days Application conditions Air and surface 60°F to 90°F; humidity 30% to 70% Coats Two; more in high-traffic or abrasive conditions Apply with Pure bristle brush; Polyester brush; Flat pad; Spray; Lambswool on large flat areas Thinning Do not thin Cleanup Paint thinner or mineral spirits VOC Less than 350 per current TDS Topcoat compatibility May coat thoroughly dry stained surfaces; Old Masters Oil-Based Sanding Sealer recommended as optional undercoat Manufacturer part # 49516 How to applyStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, and glue; Sand bare wood medium to fine with grain; remove dust; Sand previously finished surfaces with 220 grit to remove gloss; Ensure stain is thoroughly dry before coating. Prepare and sand surface; remove dust Stir before and during application; do not shake Apply even full coats with grain Wait at least 6 hours, sand lightly and remove dust Apply second coat Good to knowUse limits: Over sealers containing stearates. Danger: Flammable liquid and vapor; may cause skin sensitization, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS applies to gallon liquid SKU. Danger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container. Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance. QuestionsHow much will I need?Use these manufacturer coverage figures: Application text: approximately 500 sq ft/gal; TDS recommended dry film: 350 to 450 sq ft/gal at 1.5 mils. Match the figure to the container size, and account for the stated number of coats. When can I apply another coat?The listed manufacturer recoat guidance is 6 hours under ideal conditions; overnight recommended. Follow the application conditions and instructions for this product. Manufacturer directions and product information
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$13.24