ameriDroid Smart Home powered by Home Assistant

Can't Access Home Assistant UI? If homeassistant.local:8123 isn't working and your HA Hub's IP is 192.168.1.18, how else can you access the web UI? Check Answer Fully flashed and assembled! Ready to run out of the box. ameriDroid Smart Home powered by Home Assistant and the ODROID-M1S offers an affordable entry point with impressive features. Equipped with a Rockchip RK3566 Processor and 64GB onboard eMMC pre-flashed with Home Assistant, this bundle also provides the choice of 4GB or 8GB RAM, along with a Case, Power Supply, RTC Battery, Optional Zigbee and Ethernet Cable included. With 2x USB ports, the ODROID-M1S offers versatile connectivity options. Users can easily integrate Z-Wave or Zigbee Modules to enhance their smart home setup. Additionally, for those in need of extra USB ports, the Internal USB Board for M1S offers a convenient solution, allowing the addition of a third USB Port to the board. Moreover, the M1S features an M.2 Port, enabling users to add an NVMe Drive for expanded storage capacity. ameriDroid Smart Home powered by Home Assistant 4GB/64GB $79.95 ODROID-M1S 4GB 64GB eMMC on board flashed with Home Assistant OS Case Power Supply (USB-C) RTC Battery Ethernet Cable ameriDroid Smart Home powered by Home Assistant 8GB/64GB $89.95 ODROID-M1S 8GB 64GB eMMC on board flashed with Home Assistant OS Case Power Supply (USB-C) RTC Battery Ethernet Cable ameriDroid Smart Home powered by Home Assistant 4GB/64GB w/Zigbee  $119.95 ODROID-M1S 4GB 64GB eMMC on board flashed with Home Assistant OS Case Power Supply (USB-C) RTC Battery Ethernet Cable Internal USB Module SkyConnect assembled internally ameriDroid Smart Home powered by Home Assistant 8GB/64GB w/Zigbee  $129.95 ODROID-M1S 8GB 64GB eMMC on board flashed with Home Assistant OS Case Power Supply (USB-C) RTC Battery Ethernet Cable Internal USB Module SkyConnect assembled internally NOTES *In some rare cases if you are able to access port "4357" but you cannot access port "8123" after the first boot, you will need to follow instructions to flash HAOS on the eMMC here "https://www.home-assistant.io/installation/odroid#flashing-an-odroid-m1s" ameriDroid Smart Home Guide