SEMCO Nu-Lift Cleaner

SEMCO Surface Preparation SEMCO Nu-Lift Cleaner An environmentally responsible mineral-acid cleaner designed to remove mineral deposits, stains, alkalinity, and surface contamination without harming or discoloring grout and natural stone. SEMCO Nu-Lift Cleaner lifts and removes dirt, efflorescence, hard-water deposits, magnesium, lime deposits, soap scum, alkalinity, and organic stains while remaining user-friendly, biodegradable, and suitable for use in confined areas. Product Highlights Cleaner Type Mineral Acid Environmentally responsible formula Biodegradability 100% Biodegradable cleaner Primary Use Deep Cleaning Mineral and organic deposits Application Areas Grout & Stone Safe on compatible surfaces Key Benefits Removes mineral deposits Safely dissolves efflorescence, magnesium, lime deposits, hard-water residue, and similar mineral buildup. Removes organic contamination Helps lift dirt, soap scum, stains, and other organic deposits from compatible surfaces. Balances low pH Supports proper surface preparation by helping address alkalinity and mineral residue before sealing or coating. Surface-friendly cleaning Formulated to clean grout and natural stone without harming or discoloring properly tested compatible surfaces. Confined-area use Designed to be more user-friendly than traditional harsh acid cleaners and can be used in suitable confined areas with proper precautions. Biodegradable formula A 100% biodegradable cleaning solution designed for professional surface preparation and restoration work. Prep B Procedure Step 1 — Prepare the space Remove debris from the surface and gather all required cleaners, water, sprayers, brushes, and equipment before beginning. Step 2 — Washing process Mix 1 part Stone Soap with 4 parts water. Mix 1 part Power Cleaner with 4 parts water. Lightly dampen the surface with water to reduce deep cleaner penetration. Apply the Power Cleaner mixture lightly with a pump sprayer and allow it to sit for 2–3 minutes. Scrub using a scrub machine or nylon brush. Rinse thoroughly and ensure no residue remains. Repeat the cleaning process with the Stone Soap mixture to remove chemical residue. Step 3 — Additional information Allow the surface to dry completely before applying sealers. Do not use muriatic acid for surface preparation, as remaining residue may cause adhesion problems. Prep C Procedure Step 1 — Prepare the space Remove loose debris and gather all cleaning products, water, sprayers, brushes, and equipment needed for the procedure. Step 2 — Prepare cleaning solutions Power Cleaner Solution 1: Mix 1 part Power Cleaner with 4 parts water. Power Cleaner Solution 2: Mix 1 part Power Cleaner with 9 parts water. Nu-Lift Solution: Mix 1 part Nu-Lift Cleaner with 1 part water. Step 3 — Washing process Lightly dampen the surface with water. Apply Power Cleaner Solution 1 with a pump sprayer and allow it to sit for 2–3 minutes. Scrub with a scrub machine or nylon brush. Rinse thoroughly and remove all residue. Apply the diluted Nu-Lift Cleaner and repeat the scrubbing and rinsing process. Apply Power Cleaner Solution 2 and repeat the cleaning process once more. Step 4 — Additional information Allow the surface to dry completely before applying sealers. Do not use muriatic acid, as residue may interfere with coating or sealer adhesion. Prep D Procedure Step 1 — Prepare the space Remove all loose debris and prepare the required cleaners, water, sprayer, nylon brush, or scrubbing machine. Step 2 — Nu-Lift cleaning process Lightly wet the surface before applying Nu-Lift Cleaner. Apply undiluted Nu-Lift Cleaner and allow it to sit for 2–3 minutes. Scrub using a scrub machine or nylon brush. Rinse thoroughly and ensure no residue remains. Step 3 — Stone Soap rinse Mix 1 part Stone Soap with 4 parts water. Apply the mixture and allow it to sit for 2–3 minutes. Scrub the surface with a scrub machine or nylon brush. Rinse thoroughly and remove all remaining residue. Step 4 — Additional information Allow the surface to dry completely before applying sealers. Do not use muriatic acid for preparation because residue may lead to adhesion problems. Downloads SEMCO Nu-Lift Cleaner Product Data Sheet PDF — product information, surface compatibility, mixing guidance, cleaning procedures, and technical recommendations. Always lightly dampen porous surfaces before applying cleaner unless the selected preparation procedure specifically directs otherwise. Test the product in a small, inconspicuous area before full application. Do not mix cleaning products together unless specifically instructed by SEMCO. Wear proper gloves and eye protection, provide adequate ventilation, rinse thoroughly between cleaning stages, and never use muriatic acid as a substitute.