Novatek Floating Head SRAT 7" Elec. – SRAT7E

Novatek SRAT7E 7" Electric Shrouded Grinder for High-Coverage Surface PrepThe SRAT7E drives a 7-inch floating-head vacuum shroud with a 1,300W electric motor, covering more ground per pass than the 5" model while routing dust into a vacuum. The shroud floats independently of the motor and rides the slab, keeping the wider disc flat across an uneven surface. Plug into standard 110V power and the tool runs with no compressor, hose, or air line to manage on site. Why Contractors Run the SRAT7E on ElectricThe 7" disc clears open floor faster than the 5" model, and the 1,300W electric drive means it works anywhere there is an outlet or generator. The unit is built in 110V and 220V configurations to match the site supply. Floating head keeps the 7" disc flat to the surface across an uneven slab, so the wider face cuts evenly instead of digging on one edge. 7" disc covers more area per pass than the 5" model, so open-floor grinding and large coating-removal jobs move faster. 1,300W electric motor runs off standard 110V power, so there is no compressor or air line to haul to the job. Vacuum shroud captures grinding dust at the source for OSHA respirable crystalline silica compliance when paired with a HEPA vacuum. Replaceable wear skirt maintains the vacuum seal and protects the cast-aluminum shroud, so you swap a low-cost part instead of the housing. 5/8"-11 arbor accepts a wide range of abrasives; Scotch-Brite Coating Removal discs ship on the tool as standard. SRAT7E Applications and EnvironmentsUse the SRAT7E for concrete grinding, coating, mastic, and epoxy removal, surface profiling ahead of new coatings, and large-area work on silica-controlled job sites. The 7" electric drive suits interior restoration, retail and warehouse build-outs, and crews running off building power or a generator instead of compressed air. Specifications Part Number SRAT7E Power Source Electric Disc Size 7 in Motor 1,300W Voltage 110V and 220V configurations Current (110V) 10 amp Power Cord 14 gauge, 3 wire, 50 ft maximum length Arbor / Spindle 5/8 in - 11 thread Dust Control Floating-head vacuum shroud, replaceable wear skirt Discs Supplied Scotch-Brite Coating Removal disc (standard) Included Side handle Vacuum Pairing HEPA vacuum (required for silica capture) Documents Manual