Novatek RPT w/ Flaps 4" Elec – RPT4EF

RPT4EF 4" Electric RotoPeen with 3M Flaps for High-Production Profiling Without AirThe Novatek RPT4EF is a 4" electric hand-held scarifier fitted with tungsten-carbide-coated 3M RotoPeen flaps and an integrated vacuum shroud. The 1,200-watt 110V motor drives the wide 4" flap hub to abrade paint, rust, and thin coatings to a bare-metal, shot-blast-style profile across open horizontal areas. Electric drive removes the compressor from the work face, and the 1.5" vacuum port captures dust at the source. How the RPT4EF Profiles Decks and FloorsThe 110V motor spins the 4" flap hub at 2,000 RPM, peening twice the surface width of the 2" electric model so decks and floors reach a uniform recoat profile in fewer passes on standard site power. The 4" electric model is supplied as a dedicated flap tool and does not convert to a star-cutter hub; choose an air model or an electric star-cutter unit for fracturing hard scale. 4" working width doubles profiling coverage of the 2" electric model 3M RotoPeen flaps strip paint and rust to a bare-metal, shot-blast-style profile 1,200-watt 110V motor runs on site power, no compressor required Integrated shroud with 1.5" vacuum port for dust capture with a HEPA vacuum Dedicated flap configuration; does not convert to a star-cutter hub Roller bed follows deck transitions and gentle curves RPT4EF Applications and EnvironmentsUse the RPT4EF for high-production coating removal and recoat profiling on ship and barge decks, bridge decks, and concrete floors where compressed air is not available. It strips floor markings and line stripes over large areas, lifts non-slip coatings, and supports contained lead-paint removal on dust-controlled, SSPC-NACE surface-prep sites. Specifications Cutting media 3M RotoPeen tungsten-carbide-coated flaps Working width 4 in Motor power 1,200 W Voltage 110V Speed 2,000 RPM Weight 12 lbs Vibration level 5.2 m/s² Vacuum port 1.5 in Documents Manual