Novatek RPT w/ Flaps 4" Air – RPT4AF

RPT4AF 4" Air RotoPeen with 3M Flaps for High-Production Recoat ProfilingThe Novatek RPT4AF is a 4" pneumatic hand-held scarifier fitted with tungsten-carbide-coated 3M RotoPeen flaps and an integrated vacuum shroud. The 4" cutting width abrades paint, rust, and thin coatings to a bare-metal, shot-blast-style profile across wide horizontal areas in fewer passes. The 1.5" vacuum port captures dust at the source. How the RPT4AF Profiles FasterThe 1.2 HP air motor spins the 4" flap hub at 2,700 RPM, peening twice the surface width of the 2" model so decks and floors reach a uniform recoat profile quickly. At 9 lbs it stays manageable for a 4" head while delivering high production on flat work. The quick-change hub converts to a star-cutter hub in minutes for heavy removal. 4" working width doubles profiling coverage of the 2" model on flat surfaces 3M RotoPeen flaps strip paint and rust to a bare-metal, shot-blast-style profile Runs on shop air at 30 CFM @ 90 PSI with no power at the work face Integrated shroud with 1.5" vacuum port for dust capture with a HEPA vacuum Quick-change hub converts to star cutters in minutes for heavy removal Roller bed follows deck transitions and gentle curves 9 lbs for a manageable 4" head on horizontal work RPT4AF Applications and EnvironmentsUse the RPT4AF for high-production coating removal and recoat profiling on ship and barge decks, bridge decks, and concrete floors. It strips floor markings and line stripes over large areas, lifts non-slip coatings, and supports contained lead-paint removal on dust-controlled, SSPC-NACE surface-prep sites. Specifications Cutting media 3M RotoPeen tungsten-carbide-coated flaps Working width 4 in Drive motor 1.2 HP air motor Speed 2,700 RPM Air consumption 30 CFM @ 90 PSI Weight 9 lbs Vibration level 3.1 m/s² Vacuum port 1.5 in Hub Quick-change, converts to star-cutter hub Documents Manual