Novatek RPT 2" Elec Kit – RPT2EK

RPT2EK 2" Electric RotoPeen Kit with Both Hubs for Removal and ProfilingThe Novatek RPT2EK is the kit configuration of the 2" electric hand-held scarifier. It pairs the 1,200-watt 110V tool with both cutting hubs so one purchase covers aggressive removal and recoat profiling without a compressor. The star-cutter hub fractures hard scale and thick coatings; the 3M flap hub abrades paint and rust to a shot-blast-style finish. The 1.5" vacuum shroud captures dust on either setup. What the RPT2EK Kit AddsWhere the single-media electric models ship with one hub, the RPT2EK bundles the hubs and abrasives to convert the 2" tool between star cutters and 3M flaps in minutes. The 1,200-watt 110V motor drives both modes on standard site power, so one tool handles heavy removal and profiling where air is not available. Includes both the star-cutter hub and the 3M RotoPeen flap hub Star cutters fracture hard scale; flaps profile to bare metal for recoat 1,200-watt 110V motor runs on site power, no compressor required Converts between hubs in minutes for removal and profiling in one plan 2" working width for controlled vertical and overhead prep Integrated 1.5" vacuum port for dust capture with a HEPA vacuum RPT2EK Applications and EnvironmentsUse the RPT2EK on contracts needing both heavy coating removal and a recoat profile where compressed air is not practical, including bridge and deck steel, structural members, and concrete floors. It strips line stripes and floor markings, lifts non-slip coatings, and supports contained lead-paint removal on dust-controlled, SSPC-NACE surface-prep sites. Specifications Cutting media Star-cutter hub and 3M RotoPeen flap hub Working width 2 in Motor power 1,200 W Voltage 110V Vacuum port 1.5 in Hub Quick-change, both hubs included Documents Manual