Novatek RPT w/ Flaps 2" Elec – RPT2EF

RPT2EF 2" Electric RotoPeen with 3M Flaps for Recoat ProfilingThe Novatek RPT2EF is a 2" electric hand-held scarifier fitted with tungsten-carbide-coated 3M RotoPeen flaps and an integrated vacuum shroud. The 1,200-watt 110V motor spins the flap hub to abrade paint, rust, and thin coatings to a bare-metal, shot-blast-style finish. Electric drive removes the compressor from the work face, and the 1.5" vacuum port captures dust at the source. At 11 lbs the 2" head suits vertical and overhead prep. How the RPT2EF Flap Hub WorksThe 3M flaps peen the surface as the 110V motor drives the hub, stripping coatings without gouging the substrate to leave a uniform recoat profile on steel and concrete. Running on standard site power, the RPT2EF is the electric counterpart to the air RPT2AF for crews working where compressed air is not practical. 3M RotoPeen flaps strip paint and rust to a bare-metal, shot-blast-style profile 1,200-watt 110V motor runs on site power, no compressor required 2" working width at 11 lbs for controlled vertical and overhead prep Integrated shroud with 1.5" vacuum port for dust capture with a HEPA vacuum Roller bed follows curved tanks, pipe, and transitions Works to within 1.5" of walls RPT2EF Applications and EnvironmentsUse the RPT2EF to remove coatings and lay a recoat profile on bridge and deck steel, structural members, and concrete where air is not available. It strips floor markings and line stripes, lifts non-slip coatings, and feathers patches on dust-controlled, SSPC-NACE surface-prep sites including contained lead-paint removal. Specifications Cutting media 3M RotoPeen tungsten-carbide-coated flaps Working width 2 in Motor power 1,200 W Voltage 110V Speed 2,000 RPM Weight 11 lbs Vibration level 3.6 m/s² Vacuum port 1.5 in Documents Manual