Novatek RPT w/ Star Cutters 2" Elec – RPT2EC

RPT2EC 2" Electric RotoPeen with Star Cutters for Sites Without AirThe Novatek RPT2EC is a 2" electric hand-held scarifier fitted with carbon-steel star cutters and an integrated vacuum shroud. The 1,200-watt 110V motor drives the star-cutter hub to fracture mill scale, rust, and thick coatings on steel and concrete. The electric drive removes the need for a compressor at the work face, and the 1.5" vacuum port captures debris at the source. How the RPT2EC Star-Cutter Setup CutsThe star cutters strike the surface to chip away hard material rather than abrade it, making the RPT2EC the choice for heavy removal where 3M flaps glaze over. With a 110V supply at 1,200 watts, it runs on standard site power instead of shop air. The 2" head and 14 lb weight keep the tool controllable on columns and tight sections. Star cutters fracture mill scale, rust, and thick coatings on steel and concrete 1,200-watt 110V motor runs on site power, no compressor required 2" working width for controlled access on columns and tight sections Integrated shroud with 1.5" vacuum port for dust capture with a HEPA vacuum Roller bed follows curved surfaces and pipe Works to within 1.5" of walls RPT2EC Applications and EnvironmentsUse the RPT2EC for coating removal and profiling on bridge and deck steel, structural members, and concrete where compressed air is not available. It strips line stripes and floor markings, lifts non-slip coatings, and handles contained lead-paint removal on dust-controlled, SSPC-NACE surface-prep sites. Specifications Cutting media Carbon-steel star cutters Working width 2 in Motor power 1,200 W Voltage 110V Weight 14 lbs Overall width 6.25 in Overall depth 6 in Vacuum port 1.5 in Documents Manual