Novatek HD SH3 Short Handle - 1Pc Head – PHS3HDS

Novatek HD-SH3 Triple Scaling Hammer (Short Handle) for High-Output Work in Tight QuartersThe HD-SH3 short-handle scaling hammer drives three tungsten carbide cruciform pistons at 2,500 blows per minute each, tripling the impact footprint of the single head for faster take-down. The 9-inch handle keeps the tool compact for overhead, vertical, and confined work where a longer handle is awkward. Crews running structural steel, marine, and concrete surface prep use it on pack rust, laminar rust, thick mill scale, epoxy, and non-skid coatings. HD-SH3 Short Handle: Three-Piston Output in a Compact ToolThree pistons firing at 3 x 2,500 BPM cover a wider strip per pass than the single head, clearing flat surfaces faster at the cost of more air and weight. Two live air inlets let the operator set the handle inline or perpendicular to the work. The 9-inch handle, compared with the 18-inch long version, shortens the tool for tank interiors, overhead beams, and confined positions. The screw-top cap opens each head for field piston replacement, and nylon brush seals wipe the pistons every stroke. Three tungsten carbide cruciform pistons at 3 x 2,500 BPM cover wider strips per pass than the single head 9-inch handle keeps the tool compact for overhead, vertical, and confined-space work Two live air inlets allow inline or perpendicular handle setup to suit the work angle Higher output than the 1SH, suited to flat area while staying compact Runs on 14 CFM, so size the compressor accordingly before deployment Screw-top cap allows field replacement of heads and pistons Nylon brush seals clean each piston every stroke to reduce grit wear HD-SH3 Short Handle Applications and EnvironmentsStructural steel: clears pack rust, laminar rust, and high-build coatings across plate and weldments in overhead and confined positions. Marine: strips deck coatings, non-skid, and corrosion inside tanks and tight spaces. Concrete: take-down of slab surfaces, plus texturing and aggregate exposure when fitted with bush hammer heads. Specifications Part No. PHS3HDS Configuration Triple head, short handle Head Type Tungsten carbide cruciform, single-piece pistons (bush hammer optional) Blows Per Minute 3 x 2,500 Air Consumption 14 CFM (408 lpm) Cylinder Bore 1.06 in Piston Stroke 1.04 in Air Inlets Two live inlets (inline or perpendicular handle) Handle Length 9 in (229 mm) Tool Weight 13 lbs Documents Manual