Novatek HDSH1- Short Sc Hammer Shroud – PHS1VSEHDS

Novatek Shrouded HD Single Scaling Hammer VSE (Short Handle) for Confined Dust-Controlled WorkThe PHS1VSEHDS pairs the single-piston scaling hammer with a vacuum shroud that captures debris and dust at the head. It drives one tungsten carbide cruciform piston at 2,500 blows per minute, matching the open HD-SH1 impact, while the shroud and port route material to a connected dust collector. The 9-inch handle keeps the tool compact for overhead, vertical, and confined work where dust containment is still required. VSE Single Short Handle: Compact Dust-Controlled Single-Piston ToolThe shroud surrounds the cruciform head and connects through a port to a vacuum or dust collector, pulling coating debris and abrasive dust away as the piston works. The 9-inch handle, compared with the 18-inch long version, shortens the tool for tank interiors, overhead beams, and other confined positions. The single-piston head stays narrow for edges and detail work, and the screw-top cap and nylon brush seal carry over for field service. Vacuum shroud and port capture debris and dust at the head for connection to a dust collector One tungsten carbide cruciform piston at 2,500 BPM, matching the open HD-SH1 impact 9-inch handle keeps the tool compact for overhead, vertical, and confined-space work with dust containment Single-piston head stays narrow for edges, seams, and fittings Runs on 6.5 CFM from one mid-size compressor Screw-top cap allows field replacement of the head and piston Nylon brush seal cleans the piston each stroke to reduce grit wear VSE Single Short Handle Applications and EnvironmentsStructural steel: dust-controlled removal of pack rust, laminar rust, and high-build coatings in overhead and confined positions. Marine: strips deck coatings and non-skid inside tanks and tight spaces with debris captured. Concrete: take-down and texturing of slab surfaces with silica dust routed to a collector; aggregate exposure with the optional bush hammer head. Specifications Part No. PHS1VSEHDS Configuration Shrouded single head (VSE), short handle Dust Control Vacuum shroud with port for dust collector Head Type Tungsten carbide cruciform, single-piece piston (bush hammer optional) Blows Per Minute 2,500 Air Consumption 6.5 CFM (186 lpm) Cylinder Bore 1.06 in (28 mm) Piston Stroke 1.04 in (26 mm) Handle Length 9 in (229 mm) Tool Weight 9 lbs (4.1 kg) Documents Manual