Novatek HDSH1 - Long Sc. Hammer Shroud – PHS1VSEHDL

Novatek Shrouded HD Single Scaling Hammer VSE (Long Handle) for Dust-Controlled Coating RemovalThe PHS1VSEHDL pairs the single-piston scaling hammer with a vacuum shroud that captures debris and dust at the impact point. It drives one tungsten carbide cruciform piston at 2,500 blows per minute, the same impact as the open HD-SH1, while a shroud and vacuum port route material to a connected dust collector. The 18-inch handle suits deck, slab, and floor-level work where the operator wants reach and dust containment together. VSE Single Long Handle: Dust Capture at the Single-Piston HeadThe shroud surrounds the cruciform head and connects through a port to a vacuum or dust collector, so coating debris and abrasive dust are pulled away as the piston works. This matters on lead paint, silica-bearing concrete, and enclosed marine or tank jobs where airborne material has to be controlled. Compared with the open HD-SH1, the VSE adds the shroud and port; compared with the 9-inch short version, the long handle adds reach and a more upright stance. The screw-top cap and nylon brush seal carry over for field service. Vacuum shroud and port capture debris and dust at the head for connection to a dust collector One tungsten carbide cruciform piston at 2,500 BPM, matching the open HD-SH1 impact 18-inch handle adds reach for deck, slab, and floor-level surfaces with dust containment in place Single-piston head stays narrow for edges, seams, and detail work Runs on 6.5 CFM from one mid-size compressor Screw-top cap allows field replacement of the head and piston Nylon brush seal cleans the piston each stroke to reduce grit wear VSE Single Long Handle Applications and EnvironmentsStructural steel: dust-controlled removal of pack rust, laminar rust, and high-build coatings on beams and plate. Marine: strips deck coatings and non-skid in enclosed spaces where airborne debris must be captured. Concrete: take-down and texturing of slab surfaces with silica dust routed to a collector; aggregate exposure with the optional bush hammer head. Specifications Part No. PHS1VSEHDL Configuration Shrouded single head (VSE), long handle Dust Control Vacuum shroud with port for dust collector Head Type Tungsten carbide cruciform, single-piece piston (bush hammer optional) Blows Per Minute 2,500 Air Consumption 6.5 CFM (186 lpm) Cylinder Bore 1.06 in (28 mm) Piston Stroke 1.04 in (26 mm) Handle Length 18 in (457 mm) Tool Weight 10 lbs (4.6 kg) Documents Manual