Novatek 5 Ft LRS Al. w/ Needle Attach – 28XN5AL

Novatek 28XN5AL 5 Ft Aluminum Long Reach with Needle Attachment — Overhead Rust Removal, Lighter BarrelThe 28XN5AL is a 5-foot air-powered needle scaler on an aluminum barrel. It drives 28 chisel-tip needles to strip rust and scale off high walls and overhead steel from the floor, and the aluminum construction cuts weight against the steel version for crews holding the tool overhead through long runs. The needle head conforms to welds, pits, and contoured surfaces a flat chisel skips. Why Crews Run the 28XN5ALFull 5-foot reach for overhead work, lighter aluminum barrel, and a needle head that handles irregular surfaces. The sliding front tube takes up needle wear so the working face holds as the 3mm needles shorten. Where heavy impact durability matters more than weight, the steel 28XN5ST is the alternative. Strip rust and scale off high walls and overhead steel from the floor — no ladder or scaffold Lighter aluminum barrel holds overhead longer than the steel version 28 chisel-tip needles conform to welds, pits, and contoured surfaces a flat chisel skips Drives needles at 2,200 blows per minute Sliding front tube adjusts for needle wear as the 3mm needles shorten Runs on 5 SCFM from a portable compressor 28XN5AL Applications and EnvironmentsMarine deck, bulkhead, and weld-seam descaling, overhead structural steel rust removal, and high-wall coating stripping. The aluminum barrel suits overhead and wall runs where tool weight is the limiting factor; the needle head suits irregular and pitted surfaces. Specifications Model 28XN5AL Reach Length 5 ft Construction Aluminum Attachment Type Needle scaler Needles 28 chisel-tip needles, 3mm Blows Per Minute 2,200 Air Consumption 5 SCFM Needle Wear Adjustment Sliding front tube Grip Padded comfort grip Power Source Portable air compressor Documents Manual