Novatek 28PG Shrouded Scaler Package – 28NSVSE120

28PG Shrouded Scaler Package for High-Output Dust-Free RemovalThe Novatek 28PG Shrouded Scaler Package pairs a pistol-grip 28-needle scaler with a vacuum shroud enclosure (VSE) for contained dust capture during heavy surface prep. With 28 needles striking at 2200 blows per minute, it delivers more power and faster production on thick coatings, heavy rust, and mill scale than the 19-needle version. The shroud holds removed material at the surface for a HEPA vacuum, and the rubber pistol grip gives control on vertical and overhead work. Why the 28PG Trades Speed for Removal PowerThe 28PG runs at 2200 BPM rather than 3000, but its wider 28-needle pattern covers more surface per pass and hits with more mass behind each stroke. That makes it the choice for bulk removal of heavy coatings rather than light detail work. Each needle carries a 3mm chisel tip on a 7-inch shank and flexes over rivet heads, edges, piping, and irregular profiles. The fully adjustable front vacuum take-off seals the shroud, and the standard 1.5-inch take-off connects to a HEPA vacuum. Low air consumption keeps it on small, portable compressors. 28-needle pattern removes heavy coatings and rust per pass 2200 BPM delivers more mass behind each stroke for bulk removal Vacuum shroud captures debris at the surface for lead and asbestos compliance 1.5-inch take-off connects to a HEPA vacuum Adjustable front take-off seals to flat, curved, and riveted surfaces Pistol grip controls the tool overhead and on walls Low air consumption runs on small, portable compressors 28PG Applications and EnvironmentsThe 28PG package serves lead-paint and asbestos abatement crews removing thick or layered coatings under regulated conditions. Shipyards use it for heavy hull and deck prep, bridge and structural-steel contractors use it for bulk rust and coating removal on beams and plates, and dust-controlled job sites use it where particulate must stay low. Its 28-needle pattern and slower, heavier stroke make it the pick for high-output bulk work over detail prep. Specifications Model 28PG Shrouded (VSE) Needle Scaler Configuration Pistol grip Needles 28 pcs, 3mm chisel tip Needle length 7 in Blows per minute 2200 Vacuum take-off 1.5 in, fully adjustable front take-off Nose pieces Interchangeable for flat surfaces, corners, and angles Optional needles 2mm flat, 3mm flat or chisel tip Includes Tool and vacuum shroud (package) Documents Manual