Novatek VRS28PG Shroud Scaler Package – 28NSVSE110

VRS28PG Shroud Scaler Package for Low-Vibration Dust-Free WorkThe Novatek VRS28PG Shroud Scaler Package combines the 28-needle vibration-reduced scaler (VRS) with a vacuum shroud, giving crews the full impact of a 28-needle tool with reduced vibration transmitted to the hand. It runs at 3000 blows per minute and is Novatek's most powerful pistol-grip vibration-reduced scaler. The shroud captures coating, rust, and scale at the surface for a HEPA vacuum, and the VRS dampening lowers the chance of vibration-related injury on long shifts. What VRS Vibration Reduction Changes on the 28PGThe VRS28PG carries the same 28-needle pack and 3000-BPM impact as the standard range but adds vibration-dampening technology so operators can stay on the tool longer with less hand and arm fatigue. Tool-less needle change-out lets a crew swap or replace needles in the field without tools. Each needle uses a 3mm chisel tip on a 7-inch shank, and the shroud connects to a HEPA vacuum so removed material is drawn off as it loosens. The pistol grip keeps control on vertical and overhead surfaces, and low air consumption keeps it on small, portable compressors. Vibration-dampening reduces hand and arm fatigue on long shifts 3000 BPM with a 28-needle pack for high removal rate Vacuum shroud captures debris at the surface for lead and asbestos compliance Tool-less needle change-out for fast field swaps Connects to a HEPA vacuum for contained dust capture Pistol grip controls the tool overhead and on walls Low air consumption runs on small, portable compressors VRS28PG Applications and EnvironmentsThe VRS28PG package suits lead-paint and asbestos abatement crews running long shifts who need both contained dust and reduced vibration exposure. Shipyards use it for heavy hull and deck coating removal, bridge and structural-steel contractors use it on beams and weld seams where production rate matters, and dust-controlled job sites use it where particulate must stay low. Its combination of 28-needle power and vibration reduction makes it the pick for sustained, high-output work. Specifications Model VRS28PG Vibration-Reduced Shrouded Needle Scaler Configuration Pistol grip, vibration reduced (VRS) Needles 28 pcs, 3mm chisel tip Needle length 7 in Blows per minute 3000 Needle change Tool-less Dust capture Vacuum shroud, connects to HEPA vacuum Optional needles 2mm needle holders available Includes Tool and vacuum shroud (package) Documents Manual