Novatek 28 Needle Scaler Kit – 28NS101

28 Needle Scaler Kit for Heavy DescalingThe 28NS101 packages the 28-class needle scaler with spare needle holders and bulk needles for crews running sustained descaling. The body cycles 28 chisel-tip needles at 2,200 blows per minute, delivering heavier impact than the 19 series for thick corrosion and coating on welds and pitted steel. All-steel internals carry the repeated load. 28NS101 Kit ContentsThe kit centers on the 28 needle scaler with 3mm chisel-tip needles in an oval front tube, supplied with spare needle holders and a bulk needle supply so worn needles get replaced without a separate parts order. Keeps the crew running with spare needles and holders on hand Drives 28 needles for heavier impact than the 19 series Follows welds and pitted steel with flexing needles Strips thick corrosion at 2,200 blows per minute Runs on a portable compressor at 7.5 cfm via a 1/4-inch NPT inlet Converts to chisel work in seconds for flat surfaces 28NS101 Applications and EnvironmentsShipyard and marine crews use the kit for sustained hull and tank descaling where needle wear is constant. Bridge and structural-steel contractors prep heavy welds, while abatement and restoration teams clear thick corrosion and coatings from irregular surfaces. Specifications Tool Type Needle scaler kit Needle Set 28 pcs, 3mm x 7 in, chisel tip Blows Per Minute 2,200 Air Consumption 7.5 cfm (220 lpm) Air Inlet 1/4 in NPT Documents Manual