Novatek 28PG Chisel Scaler – 28CS120

28PG Chisel Scaler with Pistol-Grip ControlThe 28CS120 is a pistol-grip chisel scaler that drives a 1/2-inch square-shank chisel at 2,200 blows per minute. At 5.8 pounds and 11.75 inches long, the angled grip steadies the heavier impact of the 28-class body for breaking out thick coatings and slag. All-steel construction handles sustained chipping. 28CS120 Grip and Chisel SetupThe pistol-grip body ships with a 1/2-inch square-shank chisel holder and a 3/4-inch wide chisel, and accepts 2-inch, 3-inch, and 2 3/8-inch bent chisels for wider passes or flush cutting. Steadies heavy 2,200-BPM impact with an angled pistol grip Breaks out thick coatings and slag from flat steel Cuts flush against fittings with the optional bent chisel Runs on a portable compressor at 7.5 cfm via a 1/4-inch NPT inlet Converts to a needle scaler in seconds for irregular surfaces 28CS120 Applications and EnvironmentsShipyard and marine crews use the 28CS120 for heavy deck and bulkhead descaling where grip control matters. Bridge and structural-steel contractors strip thick coatings, while tank cleaners and restoration teams break out failed coatings and key concrete. Specifications Tool Type Pistol-grip chisel scaler Blows Per Minute 2,200 Weight 5.8 lb (2.6 kg) Length 11.75 in (300 mm) Air Consumption 7.5 cfm (220 lpm) Chisel Holder 1/2 in square shank, 3/4 in chisel Air Inlet 1/4 in NPT Documents Manual