Novatek 28 Chisel Scaler – 28CS100

28 Chisel Scaler for Heavy Coating BreakoutThe 28CS100 is a 28-class chisel scaler that drives a 1/2-inch square-shank chisel at 2,200 blows per minute. The larger body trades speed for heavier impact per stroke, breaking out thick coatings, weld slag, and built-up corrosion that smaller scalers labor on. All-steel construction carries the load through sustained chipping work. 28CS100 Chisel and Tube SetupThe tool ships with a 1/2-inch square-shank chisel holder and a 3/4-inch wide chisel, and accepts 2-inch, 3-inch, and 2 3/8-inch bent chisels for wider passes or flush cutting against obstructions. Breaks out thick coatings and slag with heavier 2,200-BPM impact Cuts flush against fittings with the optional bent chisel Runs on a portable compressor at 7.5 cfm through a 1/4-inch NPT inlet Converts to a needle scaler in seconds for irregular surfaces Holds tolerance through long shifts with all-steel internals 28CS100 Applications and EnvironmentsShipyard and marine crews use the 28CS100 for heavy hull and tank descaling. Bridge and structural-steel contractors strip thick coatings from connection points, while abatement and restoration teams break out failed coatings and key concrete before recoating. Specifications Tool Type Chisel scaler Blows Per Minute 2,200 Air Consumption 7.5 cfm (220 lpm) Chisel Holder 1/2 in square shank, 3/4 in chisel Air Inlet 1/4 in NPT Documents Manual