Novatek 19IL Shrouded Scaler Package – 19NSVSE100

19IL Shrouded Scaler Package for Inline Dust-Free Needle ScalingThe Novatek 19IL Shrouded Scaler Package pairs an inline 19-needle scaler with a vacuum shroud enclosure (VSE) so dust is captured at the point of impact instead of going airborne. The inline body keeps the tool axis straight with the work surface, which helps operators reach into pipe runs, channel, angle iron, and tight structural pockets that a pistol grip cannot line up on. Each needle carries a 3mm chisel tip on a 7-inch shank, and the bundle conforms to irregular profiles as it strips coatings, rust, mill scale, and weld slag. How the 19IL Inline Body Works in Confined SpacesThe inline layout puts the trigger behind the tool rather than under it, so the operator can push the needle pack straight down a flange or into a corner. The shroud surrounds the needle pack and connects to a HEPA vacuum through a 1.5-inch take-off, drawing removed material away as it is loosened. The front vacuum take-off is fully adjustable, letting you set the seal against flat panels, curved tank walls, or riveted joints. The 19-needle count keeps the tool lighter for longer hand-held runs. Captures lead, rust, and coating debris at the surface for lead and asbestos compliance work Reaches inside pipe, channel, and angle iron where a pistol grip will not fit Adjustable front vacuum take-off seals to flat, curved, and riveted surfaces Connects to a HEPA vacuum through a 1.5-inch take-off port 3mm x 7-inch chisel-tip needles conform to irregular profiles Lighter 19-needle pack supports extended hand-held run times 19IL Applications and EnvironmentsThe 19IL inline package suits lead-paint and asbestos abatement crews who must keep dust contained under regulated conditions. It is used in shipyards on hull plate, bilge, and weld-seam prep, on bridge and structural-steel jobs for spot rust and coating removal, and on any dust-controlled job site where airborne particulate must be held to a minimum. The inline form earns its place wherever access is the limiting factor: inside ductwork, behind piping, and in narrow steel channels. Specifications Model 19IL Shrouded (VSE) Inline Needle Scaler Needles 19 pcs, 3mm chisel tip Needle length 7 in Configuration Inline body Vacuum take-off 1.5 in, fully adjustable front take-off Nose pieces Interchangeable for flat surfaces, corners, and angles Optional needles 2mm flat, 3mm flat or chisel tip Includes Tool and vacuum shroud (package) Documents Manual