Novatek 19PG Needle Scaler Kit – 19NS121

19PG Needle Scaler Kit with Spare ConsumablesThe 19NS121 packages the pistol-grip 19 needle scaler with spare needle holders and bulk needles for crews running the tool daily. The body cycles 19 chisel-tip needles at 3,000 blows per minute, and the angled grip steadies overhead and horizontal work. The kit format keeps replacement consumables on hand to limit downtime. 19NS121 Kit ContentsThe kit centers on the 19 pistol-grip needle scaler with 3mm chisel-tip needles in an oval front tube, supplied with spare needle holders and a bulk needle supply so worn needles get swapped without a separate parts order. Keeps the crew running with spare needles and holders on hand Steadies overhead descaling with an angled pistol grip Follows welds and pitted steel with 19 flexing needles Strips coating at 3,000 blows per minute Runs on a portable compressor at 6 cfm via a 1/4-inch NPT inlet Converts to chisel work in seconds for flat surfaces 19NS121 Applications and EnvironmentsShipyard and marine maintenance crews use the kit for sustained deck and weld descaling where needle wear is constant. Bridge and structural-steel contractors, tank cleaners, and restoration teams rely on it for ongoing corrosion and coating removal on irregular surfaces. Specifications Tool Type Pistol-grip needle scaler kit Needle Set 19 pcs, 3mm x 7 in, chisel tip Blows Per Minute 3,000 Weight 5.7 lb (2.6 kg) Length 12.4 in (315 mm) Air Consumption 6 cfm (170 lpm) Air Inlet 1/4 in NPT Documents Manual