Novatek 19PG Needle Scaler – 19NS120

19PG Needle Scaler for Controlled Weld CleanupThe 19NS120 is a pistol-grip needle scaler that cycles 19 chisel-tip needles at 3,000 blows per minute. At 5.7 pounds and 12.4 inches long, the angled grip improves control while the needle bundle conforms to welds, pits, and rounded steel. All-steel internals carry the repeated impact load. 19NS120 Needle Set and GripThe pistol-grip body ships with 19 pieces of 3mm by 7-inch chisel-tip needles in an oval front tube that concentrates the pattern. The sliding front tube advances to hold working length as needles wear, and an optional 2mm holder handles finer profiles. Improves control on overhead work with an angled pistol grip Follows welds and pitted steel a flat chisel skips Removes rust and coating at 3,000 blows per minute Concentrates 19 needles through an oval front tube Runs on a portable compressor at 6 cfm via a 1/4-inch NPT inlet Converts to chisel work in seconds for flat surfaces 19NS120 Applications and EnvironmentsShipyard and marine crews descale decks and bulkheads with the 19NS120 where grip control matters. Bridge and structural-steel contractors prep welds, tank cleaners strip interior corrosion, and restoration teams remove coatings from irregular substrates. Specifications Tool Type Pistol-grip needle scaler Needle Set 19 pcs, 3mm x 7 in, chisel tip Blows Per Minute 3,000 Weight 5.7 lb (2.6 kg) Length 12.4 in (315 mm) Air Consumption 6 cfm (170 lpm) Air Inlet 1/4 in NPT Documents Manual