Novatek 19 In-Line Needle Scaler Kit – 19NS101

19 InLine Needle Scaler Kit with Spare ConsumablesThe 19NS101 packages the 3,000-BPM 19 inline needle scaler with spare needle holders and bulk needles for crews that run the tool daily. The 19-needle bundle conforms to welds and pitted steel, and the kit format keeps replacement consumables on hand to limit downtime. All-steel construction carries the repeated impact load. 19NS101 Kit ContentsThe kit centers on the 19 inline needle scaler with 3mm chisel-tip needles in an oval front tube, supplied with spare needle holders and a bulk needle supply so worn needles get swapped without a separate parts order. Keeps the crew running with spare needles and holders on hand Follows welds and pitted surfaces with 19 flexing needles Strips coating and corrosion at 3,000 blows per minute Holds working reach through a sliding oval front tube Runs on a portable compressor at 6 cfm via a 1/4-inch NPT inlet Converts to chisel work in seconds for flat surfaces 19NS101 Applications and EnvironmentsShipyard and marine maintenance crews choose the kit for sustained hull and weld descaling where needle wear is constant. Bridge and structural-steel contractors, tank cleaners, and restoration teams use it for ongoing corrosion and coating removal on irregular surfaces. Specifications Tool Type Inline needle scaler kit Needle Set 19 pcs, 3mm x 7 in, chisel tip Blows Per Minute 3,000 Weight 5.8 lb (2.6 kg) Length 14.8 in (375 mm) Air Consumption 6 cfm (170 lpm) Air Inlet 1/4 in NPT Documents Manual