Novatek 19PG Chisel Scaler – 19CS120

19PG Chisel Scaler with Pistol-Grip ControlThe 19CS120 is a pistol-grip chisel scaler that drives a 1/2-inch square-shank chisel at 3,000 blows per minute. At 4.6 pounds and 10.2 inches long, the angled grip puts the operator's hand behind the tool for control on horizontal and overhead coating removal. All-steel construction holds up to repeated chipping work. 19CS120 Grip and Chisel SetupThe pistol-grip body ships with a 1/2-inch square-shank chisel holder and a 3/4-inch wide chisel, and accepts 2-inch, 3-inch, and 2 3/8-inch bent chisels for wider passes or flush cutting. Positions the hand behind the tool for steadier chipping control Strips coating and slag from flat steel at 3,000 blows per minute Stays compact at 10.2 inches and 4.6 pounds for confined work Runs on a portable compressor at 6 cfm through a 1/4-inch NPT inlet Converts to a needle scaler in seconds for curved surfaces 19CS120 Applications and EnvironmentsShipyard and marine crews use the 19CS120 for deck and bulkhead descaling where a pistol grip improves control. Bridge and structural-steel contractors strip connection points, while tank cleaners and restoration teams break out coatings and key concrete ahead of recoating. Specifications Tool Type Pistol-grip chisel scaler Blows Per Minute 3,000 Weight 4.6 lb (2.1 kg) Length 10.2 in (260 mm) Air Consumption 6 cfm (170 lpm) Chisel Holder 1/2 in square shank, 3/4 in chisel Air Inlet 1/4 in NPT Documents Manual