Novatek 19 In-Line Chisel Scaler – 19CS100

19 InLine Chisel Scaler for Steel Coating RemovalThe 19CS100 is a compact inline chisel scaler that drives a 1/2-inch square-shank chisel at 3,000 blows per minute. At 4.4 pounds and 13.5 inches long, it stays controllable for overhead and extended work while stripping coatings, slag, and corrosion from steel. All-steel construction carries the impact load through repeated production cycles. 19CS100 Chisel and Tube SetupThe tool ships with a 1/2-inch square-shank chisel holder and a 3/4-inch wide chisel, and accepts 2-inch, 3-inch, and 2 3/8-inch bent chisels for wider strokes or cutting against obstructions. Strips paint and mill scale from flat steel at 3,000 blows per minute Stays controllable overhead at 4.4 pounds and 13.5 inches Cuts flush against fittings with the optional bent chisel Runs on a portable compressor through a 1/4-inch NPT inlet Converts to needle scaling in seconds for curved surfaces 19CS100 Applications and EnvironmentsShipyard and marine crews use the 19CS100 for hull-plate descaling and weld prep. Bridge and structural-steel contractors strip connection points and gusset plates, while tank cleaners and restoration teams break out old coatings and key concrete before recoating. Specifications Tool Type Inline chisel scaler Blows Per Minute 3,000 Weight 4.4 lb (2.0 kg) Length 13.5 in (337 mm) Air Consumption 6 cfm (170 lpm) Chisel Holder 1/2 in square shank, 3/4 in chisel Air Inlet 1/4 in NPT Documents Manual