Non-Silicone High Temp Paste Wax

This High Temp Paste Wax is specifically designed to release epoxy and polyester—for application temperatures ranging from 75° to 375°. Due to its smooth consistency, this paste wax is easier to apply to the mold than other paste waxes. It's a fluorocarbon/wax based compound and does not contain any silicone materials, so there are no silicone contamination concerns. Fabricators can apply this wax to polyester, epoxy, steel, and aluminum molds with assurance of no silicone contamination. Special preparation is required when using on a new mold: Apply a minimum of three layers of Non-Silicone High Temp Paste Wax, each four to six hours apart. Select an area of four square feet, and rub on the creamy wax with a clean terry cloth. Before it dries, use a separate cloth to break the surface film. After waxing, buff the entire surface until the wax is clear.