UniJet® Brass Spray Jet Tip w/ #3 Orifice (#A00094A-11) for EDIC Carpet Extractor Wands

This brass #3 jet tip features a slightly larger orifice than the #1.5 spray jet that is typically used with heated carpet extractors. The larger opening allows more water to pass through, making it ideal for non-heated extractors where higher water volume is preferred. Larger spray jets don't maintain heat as well as smaller-orifice tips, so larger spray jets are best suited for cold water or low PSI cleaning applications. If you're looking to increase the water flow through your drag wand, these are the tips you need. If your wand isn’t dispensing solution or has restricted flow, other parts may also need cleaning or replacement. We recommend soaking all parts from the spray tip assembly in a vinegar solution to help break down buildup caused by carpet cleaning solutions. If cleaning doesn’t restore proper function, it’s time to replace the tips and any other affected components. Please refer to the diagram below to identify the exact part you need. This listing is for Part B (spray jet tip). Part A: Threaded Spray Body Cap Part B: UniJet Brass Spray Jet w/ #3 Orifice Part C: Teejet Tip Strainer For additional replacement parts for your carpet and upholstery tools, browse our full drag wand jets & parts section.