NIKRO PS1000 Upright Poly Air Scrubber – 950 CFM

NIKRO PS1000 Lightweight Poly Air Scrubber for Restoration CrewsThe NIKRO PS1000 is a 74-pound upright poly air scrubber with a variable-speed blower running 500 to 950 CFM. It draws only 3.5 amps and places its 99.97% certified HEPA filter after the motor, so the exhaust stays clean of carbon and bearing dust. The dent and corrosion resistant polyethylene body suits remediation, restoration, and abatement work. NIKRO PS1000 Post-Motor HEPA and 3.5-Amp Draw HEPA filter sits after the motor, so carbon and bearing dust from the motor never reach the exhaust air Variable-speed blower runs 500 to 950 CFM, so you tune airflow to a small room or a whole enclosure Draws only 3.5 amps at 115V, leaving headroom to run more equipment on a single circuit Dent and corrosion resistant polyethylene housing holds up to wet, rough remediation sites At 74 lbs, one worker lifts and stacks it without help Daisy chain outlet lets you power a second unit downstream, and 12-inch intake and exhaust flanges duct both ends Filter monitoring gauge and hour meter track filter loading and runtime PS1000 Applications and EnvironmentsRemediation, restoration, and abatement contractors use the PS1000 where circuit capacity and weight matter. The 3.5-amp draw lets crews run several units or added equipment on one circuit, and the daisy chain outlet powers a downstream machine without another wall plug. Placing the HEPA filter after the motor keeps motor-generated dust out of the clean exhaust, which matters in occupied spaces. The polyethylene body resists dents and corrosion on wet jobs, and 12-inch intake and exhaust flanges let crews duct both ends. At 74 lbs it is the easiest NIKRO scrubber in this lineup to carry and stack. Specifications 99.97% HEPA Filter 3-Stage Filtration 500 to 950 CFM Variable Speed Unit 12" intake and exhaust hose flanges Daisy Chain Outlet Filter monitoring gauge Hour meter 19" x 23" x 39" / 74 lbs 115v / 3.5 amps