Nickel Plated #41 Roller Chain 100' Spool

#41 nickel plated roller chain for chain-driven slide gate operators. Pitch is 1/2 in, roller diameter 0.306 in, and inner width 1/4 in. The nickel plating resists rust better than plain steel chain in wet or coastal areas. Sold as one 100 ft spool. #41 is a lighter 1/2 in pitch chain used on many residential and light commercial slide gate operators. The chain runs the length of the gate, wraps the operator's drive sprocket and idlers, and bolts to the gate at each end. Features #41 roller chain, 1/2 in pitch Roller diameter 0.306 in, inner width 1/4 in Nickel plated for corrosion resistance 100 ft spool for multiple gates or long runs Before You Order #41 and #40 share the same 1/2 in pitch but are not interchangeable. #41 is the narrower, lighter chain with a 1/4 in inner width. Check the chain size in your operator manual or on the drive sprocket before you order. If you are replacing chain, measure pitch (pin center to pin center) and inner width. Master links are not included. Order #41 nickel plated master links to join the chain ends, and a #41 nickel plated half link if you need to adjust length by one pitch. Need a shorter length? This chain is also sold by the foot. Other nickel plated sizes in this format: #40, #50 and #65.