Nickel & Chrome 3-Step Buffing Kit For Die Grinder – 2”

Product Specification Shipping Refund Product Specification Nickel & Chrome 3-Step Buffing Kit For Die Grinder – 2” Included in this kit: 2" Felt Quick Change Discs x 10 2” Quick Change Rubber Mandrel x 1 Grey Stainless Compound (first step) x 1 White Rouge Stainless Compound (second step) x 1 Emerald Green Compound (third step) x 1 STEPS: First step - Use the grey stainless compound to remove scratches Second Step - Use the white rouge compound for a natural luster finish. Third Step - Use the emerald green compound for a high luster finish. ***Read our Safety Tips/Techniques below for additional use recommendations if this is your first time using this product. The nickel and chrome 3 step kit is designed for use on nickel and chrome plated metals. Quantity: 1 Set Machines Used On: Die Grinders and hand-held pneumatic grinders  Application: Ferrous Materials – Nickel and Chrome plated metals Dry use only Safety Tips/techniques: Only use one buffing wheel per compound type to eliminate cross contamination between compounds.  We suggest marking each buffing wheel with a marking pen for easy reference. Bring the compound to a spinning buffing wheel to melt the compound onto the buffing wheel.  Friction will melt the compound onto the buffing wheel surface.  Make sure not to overload the buffing wheel. Ensure the work piece is held firmly in place before bringing the buffing wheel to the material.  Apply light pressure, let the wheel and compound do the work. When removing the buffing wheel from the material, remove at a slanting downward stroke to blend buffing marks and avoid unintended spotty or streaking results. Never allow the edge the of the buffing wheel make contact with the edge of your work; this can result in the machine being ripped from your hands or damage to the buffing wheel.   Always wear proper PPE to include (but not limited to) safety glasses, hearing protection, respirator, and hand protection.  Keep all guards in place on your machine.