New Schneider Foxboro DCS FCP280 RH924YA CPU Module Field Control Processor

New Schneider Foxboro DCS FCP280 RH924YA CPU Module Field Control Processor Same day shipping, ships UPS 1-Day service.  Arrives tomorrow! Product pulled from bulk OEM packaging. 30-day Warranty Processor Type: •             Control Processor: ARM® System on a Chip (SOC) •             Memory: •             128 MB SDRAM •             128 MB Flash Memory •             Error Detection: ECC for single-bit error correction and multiple-bit error detection Process I/O Communications: •             Fieldbus Type: HDLC •             Transmission Rate: •             2 Mbps for 200 Series FBMs •             268 Kbps for 100 Series FBMs Process I/O Capacity: •             200 Series FBMs: •             Up to 32 per Expanded Fieldbus •             Up to 128 FBMs over all four Expanded Fieldbuses with 200 Series FBMs •             Mixed with 100 Series FBMs: Up to 128 FBMs, e.g., 64 100 Series and 64 200 Series FBMs •             100 Series FBMs: •             64 FBMs per PIO bus/baseplate port •             Total of 128 FBMs per FCP280 •             Competitive Migration Modules: Refer to device-specific Product Specification Sheets Memory Allocation for Blocks: •             Classic OLUG: 15.75 MB •             Enhanced OLUG: 19.75 MB Maximum Number of Blocks Configured: •             Total: 8,000 (7,993 user-configured) Block Executions Per Second: •             Maximum: 16,000 blocks/second Maximum Number of Blocks Processed: •             Depends on: Scan periods and block type selection Minimum Block Processing Cycle (BPC): •             Time: 50 ms Sequence Block Size: •             Maximum: 32 kB per block Maximum Number of IPC Connections: •             Total: 231 •             200 Source Points •             30 Sink Points •             1 Internal Use Only Maximum Number of OM Sink Lists: •             Total: 75 Maximum OM Scanner Database: •             BPC ≥ 200 ms: 18,000 points •             BPC ≤ 100 ms: 7,500 points Maximum Number of OM Sink Points: •             Total: 11,250 Configurable Block Periods: •             Seconds: 0.05, 0.1, 0.2, 0.5, 0.6, 1, 2, 5, 6, 10, 30 •             Minutes: 1, 10, 60 Block Processing Cycle: •             Options: 0.05, 0.1, 0.2, 0.5, 1.0 seconds Time to Marry Fault-Tolerant Modules: •             Less Than: 0.5 seconds Internal Diagnostics: •             Self-Checking: At power-up •             Run-Time Checks: Includes watchdog timer and constant synchronization in fault-tolerant mode Power Requirements: •             Input Voltage: 24 V DC (Redundant) •             Consumption: •             Single Module: 11 W maximum •             Fault-Tolerant Pair: 20 W maximum Regulatory Compliance and EMC: •             EMC Directive 2014/30/EU: EN 61326-1 Class A Environmental Specifications: •             Operating Temperature: -20 to 60°C (-4 to 140°F) •             Storage Temperature: -40 to +70°C (-40 to +158°F) •             Relative Humidity: 5 to 95% (Non-condensing) •             Altitude: •             Operating: -300 to +3,000 m (-1,000 to +10,000 ft) •             Storage: -300 to +12,000 m (-1,000 to +40,000 ft) •             Contamination Class: G3 (Harsh) •             Vibration: 0.5 g (5 to 500 Hz) Physical Specifications: •             Configuration: •             Single processor module •             Fault-tolerant version: Two processor modules with integral fault-tolerant connector •             Mounting: Device-specific 2-position baseplates (horizontal or vertical) •             Dimensions: •             Height: 105 mm (4.13 in) or 116 mm (4.7 in) •             Width: 51.8 mm (2.04 in) •             Depth: 147 mm (5.79 in) •             Weight (Maximum): 0.8 kg (1.76 lb)