NETGEAR XSM4556 M4500 Fully Managed Switch

Ports: 56 Ports Port Types 48 x 10G/25G SFP28 8 x 100G QSFP28 ports Details These switches combine the configurability of a matrix switcher with the power and scalability of Ethernet to support hundreds of AV over IP endpoints. M4300 and M4500 switches offer IGMP Plus and greatly simplify system architectures at a dramatically lower price point Pre-configured for out-of-the-box use NETGEAR IGMP Plus™ enables instant multicast functionality for most AV over IP installations Cost effective aggregation Cost effective 100G aggregation and 10G access layer for AV deployments and redundant spine & leaf topologies Simplified system architecture Optimized for "Spine and Leaf" redundant AV installations, with or without MLAG between spine switches High capacity for AV over IP streams Up to 320 TX / 320 RX (10 Gigabit) nodes all line rate with each other in a redundant spine and leaf architecture VLAN configuration flexibility IGMP Plus is default on VLAN 1 out of the box and can be configured on another VLAN for automatic IGMP across switches on that VLAN Power and fan redundancy 2 power supply units (APS750W) and 6 redundant fan trays (AFT402) pre-installed for 1+1 power and 4+2 fan redundancy Secure operation Advanced IPv4/IPv6 security including malicious code detection, DHCP Snooping, IP Source Guard, and Control Plane Policing (CoPP) Fault tolerance Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any Ethernet channeling Robust link aggregation Up to 64 Link Aggregation Groups (LAG, Port-Channel, LACP) with 32 ports per LAG and Multi-chassis Link Aggregation (MLAG) Comprehensive routing IPv4/IPv6 static and dynamic routing including IP Multinetting/CIDR, PBR, VRRPv2, OSPFv3, PIM-SM6, BGP4, VRF-Lite Security & Prioritization Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP) security and prioritization Multicast routing High performance IPv4/IPv6 multicast routing with PIM-SM and PIM-SM6 associated with unicast static routes, or other L3 protocol Advanced Layer 3 features Includes IP Multinetting/CIDR, Static, PBR, VRRPv2, OSPFv3, PIM-SM, VxLAN, BGP4, VRF-Lite Link Dependency Ability to enable or disable ports based on the link state of different ports for complete link dependency Configuration update simplicity Non-Disruptive Configuration for applying a new configuration file without disrupting the operation of unchanged features Extensive management capabilities Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation OOB and CLI Service port for out-of-band 1 Gigabit Ethernet management (OOB) with industry standard command line interface (CLI) only Local management console Standard RS232 straight-through RJ45 for local management console (USB 2.0 to RS232 converter with PL203 chipset is advised)