NETGEAR M4250 10G2F PoE plus AV Switch

Introducing the NETGEAR AV Line of M4250 Switches, developed and engineered for audio/video professionals with dedicated service and support. M4250 has been built from the ground up for the growing AV over IP market, combining years of networking expertise in AV with M4300 and M4500 series with best practices from leading experts in the professional AV market. AV codecs generally use 1Gbps or 10Gbps per stream and the AV Line of M4250 targets the widespread 1Gbps codecs. PoE+, Ultra90 PoE++ and rear-facing ports ensure a clean integration in AV racks. M4250 switches come pre-configured for standard audio and video signals. When requirements are more specific, an AV user interface offers customization with port-based profiles. For audio Dante, Q-SYS and AES67 profiles are available. For video the M4250 offers profiles for NVX, AMX, Q-SYS, NDI, Dante etc. as well as audio/video/control mixed profiles. When multiple switches are used, NETGEAR IGMP PlusTM brings automation for you to just connect them together, or with M4300 and M4500 switches. Highlights Extended AV features   Dedicated AV web-based GUI interface for more specific AV installations Color-based AV profiles can be applied to the different ports  Dante, Q-SYS, AES67 and AVB audio profiles NVX, SVSI, Q-SYS, NDI and Dante video profiles Audio / video / control mixed profiles Automatic switch interconnect with NETGEAR Auto-Trunk, Auto-LAG and IGMP Plus Common Layer 2 and Layer 3 switching engine across all M4250 models Built-in IT web GUI, console, telnet and SSH consistent with other NETGEAR M4300 and M4500 series Feature set includes static, RIP and PIM routing, DHCP Server and PTPv2 Audio Video Bridging (AVB) services   AVB is one of the many features designed into the M4250 product line AVB is an industry standard for transporting content over a network AVB is used most often when very low latency is required such as in live performances when lip sync is critical All of the AV Line M4250 switches can be optionally licensed for AVB support Other IT use cases   Standard or recessed mounting with all ports in the back, or all ports in the front  Fully featured L2/L3/L4 platform for midsize Enterprise campus networks, IoT and IPTV Industry standard management   Industry standard command line interface (CLI), main NETGEAR IT web interface (GUI), SNMP, sFlow and RSPAN Single-pane-of-glass NMS300 management platform with centralized firmware updates and massconfiguration support M4250-10G2F-PoE+   8-port 10/100/1000BASE-T (RJ45) PoE+ with 125W PoE budget 2-port 10/100/1000BASE-T (RJ45) 2-port 1000BASE-X (SFP) 24 Gbps non-blocking fabric across 12 ports Out-of-band 1G Ethernet management port USB-C and RJ45 RS232 console ports and USB-A storage port Front black display panel and all ports in the back Possible reversed mounting with ports in the front Rack-mounting standard brackets Longer brackets for recessed mounting (2 inches / 5 cm) Threaded hole in front (1xM10) for clamps Threaded holes on the bottom (4xM5) for 50x100mm VESA plates Selectable fan modes for fanless, quiet, or cool operation