Neon Power Supply Dimming and Flashing

Via dial knobs at end of transformer: Knob #1 adjusts desired brightness 50 - 100%. Knob #2 adjusts flashing speed or solid on. Self adjusting load sensor from 2,000vts to 12,000vts Can be mounted directly to metal. UL Listed. Reduced energy consumption. No mercury migration. Weight: 2 lbs. Input Voltage: 120V 60hz Output Voltage 12000V 42mA Size 9 1/2"L x 2 1/2"W x 1 3/4"H 24" GTO cable; 6 foot power cord; on/off pull chain Warranty: Two years NEON Gas: 15mm - 46' / 13mm - 38' / 12mm - 35' / 11mm - 33' / 10mm - 31' / 9mm - 28' / 8mm - 15' ARGON Gas: 15mm - 55' / 13mm - 46' / 12mm - 42' / 11mm - 39' / 10mm - 37' / 9mm - 34' / 8mm - 17' When calculating the length, always add 1ft. for each pair of electrodes. Installation This power supply unit is for INDOOR USE. (May be used for outdoor applications if mounted in metal weatherproof enclosure/box.) This unit can be installed on either metallic or non-metallic surfaces. Always provide adequate ventilation to power supply. Keep overall length of GTO leads under 6 feet (2m). Always keep a minimum of 1 inch between GTO leads and any metallic surfaces. When using multiple power supplies on one sign, be sure to keep at least 3 inches between each unit. Never cross GTO leads. Never run GTO leads across the power supply. Keep GTO leads as equal in length as possible. Always keep installation in conformity with all local electric codes. Modification of any type including cutting/removing of AC cord, tampering with on/off switch or tampering with casing will void any existing product warranty. NO EXCEPTIONS.