FlowForce ND2/ND3 Stage 1 Injector Kit

The fueling solution every ND2/ND3 Miata tuner has been looking for. On the ND platform, the factory injectors are the biggest constraint—once you unlock fueling, the car comes alive. +18% more flow vs. stock ND2/ND3 injectors OEM-like drivability: spray pattern and valving characteristics closely match stock for easy tuning Flow-tested & matched in Tennessee for uniform cylinder-to-cylinder fueling Direct fit for ND2 (2019–2022) and ND3 (2023+) 2.0L Skyactiv-G Supports pump gas and ethanol blends (with appropriate tune and fuel system capacity) Why it works These injectors maintain OEM spray targeting and valve behavior while increasing total flow by 18%. The result is stock-like starts and idle with the headroom you need for bolt-ons, E-blends, and forced-induction builds. Tuning Quick-Start Tuning is straightforward because FlowForce ND2/ND3 injectors have similar flow and valving characteristics to stock. Start by adding 18% to your injector flow rate/scalar in your tune, then dial in fuel trims and WOT lambda as usual. What’s included (4) FlowForce ND2/ND3 injectors (matched set) Pre-installed O-rings & OEM-style clips Install & tuning guide + video link Compatibility Mazda MX-5 Miata ND2 (2019–2022) Mazda MX-5 Miata ND3 (2023+) Manual and automatic Testing & Matching Every injector is bench-tested at our Tennessee facility and matched into sets to ensure consistent flow, latency, and spray quality across all cylinders. Detailed Instructions https://goflowforce.com/pages/nd2-injector-instructions Install Video Watch the ND injector install video For competition/off-road use where applicable. Verify local emissions compliance.