Natural Shield

Natural Shield is an exceptional waterproofing sealer that excels under the most demanding circumstances. Natural Shield’s low molecular weight allows for excellent penetration. Natural Shield fills into the pores of the substrate, in which chemical reaction follows, that creates a solid, but breathable membrane. Natural Shield provides long lasting protection for a vast array of surfaces in which it leaves a natural finish. It has durability and performance of a solvent-based system, but with the easy application and clean-up of water-based products. Natural Shield’s performance allows to be used in commercial areas to protect your surface and decrease maintenance efforts. FEATURES / BENEFITS  Excellent penetration Can be applied on damp surfaces Highly alkaline resistant Effective against freeze-thaw damage Unaffected by ultra-violet rays Increase life of mortar, tiles, stucco, brick and natural stone SUBSTRATES Existing X-Bond System Pre-Stain System Stucco Slump block Block wall Porous natural stone  TOOLS NEEDED DRYING / RECOAT TIME Drying times are affected by temperature and relative humidity. The chart represents guidelines values but each project is to be treated individually. The chart represents the time needed in between coats at specified temperature. CURE TIME Curing time is affected by temperature and humidity. For example at only 50º F, a full cure would take 10 days in comparison to at 95º F it would only take 5 days to cure.   COVERAGE sq ft / gallon, 3 coats Polished Concrete 150 - 250 Artificial Stone 200 - 250 Stamped Concrete 200 - 300 Below Grade 150 - 200