Electro-Harmonix NANOPOG Polyphonic Octave Generator

The smallest member of the polyphonic POG clan provides impeccable tracking and sound. Separate level controls for dry, sub octave and octave up plus an extra Dry out and silent footswitching provide the perfect formula for this compact jewel. Specs Super, space saving design Tracks chords, sweeps or single notes with no hitches or glitches Great 12-string guitar sound or turn your guitar into a bass Amazing organ-like sounds Adjustable original pitch volume, one octave up volume and one octave down volume Dry output jack in addition to the effect output jack Silent footswitching and road worthy die-cast package EHX 9.6VDC-200mA power supply included 9V Power Jack – Although the NANO POG accepts 9V Batteries, EHX supplies your NANO POG with an Electro-Harmonix 9.6DC-200 power supply. Plug the output of the supplied AC adapter into the 9V power jack located at the top of the NANO POG. The NANO POG draws 25mA at 9VDC with a center negative plug. The NANO POG accepts Boss® and Ibanez® style AC Adapters. Current Draw: 25mA @ 9VDC Dimensions in inches: 2.75(w) x 4.5(l) x 2(h) Dimensions in mm: 70(w) x 115(l) x 51(h) Controls DRY Knob – Controls the output volume of the DRY signal at the EFFECT OUT jack. The DRY signal is the signal present at the INPUT jack. As this knob is turned clockwise, the volume of the DRY signal at the EFFECT OUT Jack increases. SUB OCTAVE Knob – Controls the output volume of the SUB OCTAVE signal. The SUB OCTAVE signal is one octave below the original input signal, or half the frequency. As this knob is rotated clockwise, the volume of the SUB OCTAVE signal increases. OCTAVE UP Knob – Controls the output volume of the OCTAVE UP signal. The OCTAVE UP signal is one octave above the original input signal, or twice the frequency. The volume of the OCTAVE UP signal increases as this knob is rotated clockwise. FOOTSWITCH and LED – The footswitch selects whether the NANO POG is engaged or in buffered bypass mode. When the effect is engaged, the LED is lit. INPUT Jack – This ¼” jack is the audio input for the NANO POG. The input impedance is 2M Ohm. EFFECT OUT Jack – This ¼” jack outputs the NANO POG effect. The output impedance at this jack is 700 Ohm. DRY OUT Jack – This ¼” jack outputs a buffered version of the input signal. The output impedance at this jack is 500 Ohm. Note: The DRY Knob does not control the volume at the DRY OUT Jack. DRY OUT is always identical to the input signal, with no change in volume.