Agarose Tablets (0.5 g/tablet)

Product description Agarose is a gel reagent commonly used for nucleic acid gel electrophoresis or blotting analysis (such as Northern or Southern blot), and is also suitable for protein applications like radial immunodiffusion (RID) experiments. This product is molecular biology grade, free from DNase, RNase, Protease and Endonuclease, with a gel strength ≥1200 g/cm².  It is formulated as pre-formed tablets packaged in blister plates (0.5 g per tablet), offering simplified handling and eliminating concerns about agarose residue sticking to container walls. This design ensures effortless gel preparation, making it an optimal choice for laboratory workflows. Components Components No. N132103S Size 1 BOX (200 TABLETS) Specifications CAS NO. 9012-36-6 Appearance White to off-white powder Gel Strength, 1.0% ≥1200 g/cm2 Gel point, 1.0% 36±1.5℃ Melting Point, 1.5% 88±1.5℃ EEO ≤0.13 Sulfate, % ≤0.15% Moisture ≤10% Ash Content ≤0.5% DNase None Detected RNase None Detected Protease None Detected Endonuclease None Detected Shipping and Storage Store at room temperature, valid for five years. Notes 1. Sudden boiling of melted gel may occur. Handle with caution to prevent burns. Avoid prolonged heating in the microwave. 2. The buffer used for electrophoresis must be identical to the buffer used for gel preparation. 3. For your safety and health, please wear a lab coat and disposable gloves. 4. For research use only！ Instructions 1. Prepare an appropriate amount of electrophoresis and gel preparation buffer, and pour it into an Erlenmeyer flask. 【Note】Prepare buffer at the required concentration based on electrophoresis needs. The buffer used for electrophoresis must be identical to that used for gel preparation. 2. Based on the desired gel volume and concentration, refer to the table below. Soak the required number of agarose tablets (0.5 g/tablet) in buffer for 2-3 min to ensure complete disintegration. Gel Concentration 1 Tablet (0.5g) 2 Tablets (0.5 g*2) 3 Tablets (0.5 g*3) 1% 50 mL 100 mL 150 mL 2% 25 mL 50 mL 75 mL 3. Dissolve the agarose by heating in a microwave. Set to medium heat until boiling, maintain boiling for 30 seconds. Wearing heat-resistant gloves, remove the flask, gently swirl to resuspend undissolved particles, then reheat on high heat for 1 minute (or until agarose is fully dissolved). Wear heat-resistant gloves and swirl the flask to ensure uniform mixing. 【Note】Ensure complete dissolution of agarose to achieve a clear solution, as incomplete dissolution may result in blurred electrophoresis bands. If excessive foaming occurs during heating, stop immediately. Avoid prolonged microwave heating. 4. Cool the solution to about 60°C, then add Arcegen Nucleic Acid Stain (N132109, compatible with UV). Mix gently. 【Note】The final working concentration of the stain is 1×. Add 5 μL of 10,000×aqueous nucleic acid stain per 50 mL of agarose solution. 5. Pour the agarose solution into a gel-casting tray and insert a comb at the desired position. Gel thickness is typically 3-5 mm. 6. Allow the gel to solidify at room temperature (about 30 min to 1 h), then place it in the electrophoresis tank. 【Note】If not used immediately, wrap the gel in plastic wrap and store at 4°C for up to 2-5 days. 7. Load samples and perform electrophoresis using standard protocols. 8. Visualize results under UV light.