Mytee 8070 Lite Heated Upholstery Extractor, 4 Gallon Tanks

Mytee 8070 Lite Heated Upholstery Extractor This is a heated upholstery extractor designed to clean car seats, carpets, and interior fabrics. I keep one of these on hand any time I need to pull embedded dirt out of cloth seats or a stained carpet mat, and the heat is what makes the difference. A cold-water extractor still pulls soil out, but hot water breaks down oils and grime faster, so you spend less time working the same spot. You get a 4-gallon solution tank and a 4-gallon recovery tank, so you can run a full interior without stopping to refill every few minutes. The 1,000-watt heater brings your water up to 210°F, and the 120-PSI pump pushes it through the included 4-inch Air Lite upholstery tool with enough pressure to break up ground-in stains without soaking the padding underneath. This unit does not have a vacuum shut-off switch, so keep an eye on your recovery tank level while you work.  Features Heats water up to 210°F for faster stain and odor removal 4-gallon solution tank and 4-gallon recovery tank 120 PSI diaphragm pump rated at 1.3 GPM Single 3-stage vacuum motor rated at 100 CFM and 130 inches of water lift 15-foot hose combo with a 4-inch Air Lite upholstery tool Rear 6-inch wheels and front 2-inch locking casters for easy positioning 25 foot 12/3 power cord How to use it Fill the solution tank with hot water and your chosen upholstery cleaning solution. Plug in the unit and let the heater bring the water up to temperature before you start. Attach the 4-inch Air Lite upholstery tool to the hose combo. Work in small, overlapping sections. Trigger the tool to spray the solution, then pull it back slowly to extract. Check the recovery tank often since this model has no automatic shut-off. Empty the recovery tank and rinse it out once you finish.