MyGrid 10K Gen 2 Electricity Saver

• Get Saving Started in Minutes with Simple Setup: Install the manual transfer switch and choose which circuits run on MyGrid vs. utility power, connect your solar panels, and start enjoying energy savings, lower bills, and reliable backup power from day one. • 10kW Whole-Home Power with High-Capacity Storage: Deliver up to 10,000W continuous (20,000W surge) with a 10,496Wh LiFePO₄ battery, enabling full-home energy usage—not just backup—so you can offset grid consumption every day. • High-Efficiency Solar + Multi-Source Charging: Support up to 12,000W solar input with MPPT optimization, along with wind and AC charging, allowing you to continuously capture, store, and utilize the lowest-cost energy available. • Peak Demand Reduction & Rate Optimization: Reduce demand charges and avoid tiered utility pricing by intelligently discharging stored energy during high-load, high-cost periods—ideal for time-of-use and demand-based rate plans. • Long-Life LiFePO₄ Battery for Lower Cost per kWh: With 6,000+ cycles, the system delivers superior longevity and efficiency, significantly lowering your lifetime cost per stored kWh compared to traditional energy solutions. • Expandable Storage for Increasing Savings Over Time: Scale from 10.5kWh to 73kWh+ and up to 20kW output by adding batteries or parallel systems—allowing deeper grid offset and greater long-term energy cost reduction. • Fast Recharge + Seamless Backup Protection: Recharge to 80% in ~2 hours and benefit from <20ms automatic transfer, combining daily energy savings with uninterrupted backup power for outages and emergencies.