MU style Guitar Kit with Alder Body, Maple Fretboard

Build your own MU style DIY guitar with Alder body, Maple bolt-on neck, and fretboard with black Pearloid dot inlays. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Beginner (4/10) Tremolo bridge requires careful setup for tuning stability Alder is a closed-grain wood, so no grain filling is needed before finishing Flat body is straightforward to sand and finish evenly Body Material: Alder (2-3 pcs) Type: Solid Cutaway: Double Binding: None Top Veneer: None Neck Material: Maple Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 648 mm / 25.5" Binding: None Fretboard Material: Maple Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Dot Inlay Material: Black Plastic (ABS) Headstock Shape: Standard (as in product images) Binding: None Nut: White Plastic Electronics Neck Pickup: Single Coil Middle Pickup: Single Coil Bridge Pickup: Single Coil Controls: 1 Volume, 1 Tone, 5-Way Selector Wiring: DIY (soldering required) Wiring Diagram: SSS, 1 Volume, 1 Tone, 5-Way Switch Output Jack: Side jack Hardware Bridge: Tune-O-Matic w/ Tremolo Tuners: Chrome Sealed Pickguard: 3-Ply Pearl White Knobs: Chrome Cavity Covers: Pearl White Strings: Steel Finish: Chrome What's in the Box Alder guitar body (unfinished) Pearl-white pickguard fitted to the body with three white single-coil pickups, potentiometer shafts and a lever switch already mounted Maple neck with maple fretboard and dot inlays 6x chrome sealed tuners with bushings and washers Chrome neck plate with mounting screws Chrome tremolo bridge with six saddles 3x tremolo springs with spring claw and mounting screws Chrome tremolo arm with white tip Chrome oval jack plate with output jack fitted 2x chrome dome knobs White switch tip Pearl-white rear cavity cover with a slot Set of guitar strings 2x Allen wrenches Black instrument cable Assorted mounting screws What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.