
$129.95
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
Give your boat speakers dedicated power without giving up much installation space. The Rockville MRDF-4 is a compact four-channel marine amplifier that delivers 175W RMS per channel at 2 ohms, for 700W RMS total. At 4 ohms, it supplies 115W RMS per channel, or 350W RMS per channel when configured as two bridged channels. A conformal-coated circuit board helps protect the electronics from moisture and salt air. Stainless steel hardware, an aluminum-alloy heat sink, and a UV- and salt-resistant chassis suit marine installations. Included white silicone terminal covers help shield the power, ground, remote, and RCA connections from splashes and corrosion. Full-range, high-pass, and low-pass modes let you configure the amplifier for your speaker setup. Adjustable filters from 50Hz to 250Hz help shape the frequencies sent to full-range speakers, component speakers, or compatible bridged subwoofers. Tiffany-style RCA inputs provide the signal connection, while power, status-mode, and clipping indicators make operating conditions easier to monitor. The Class D design uses SMD components and a high-speed MOSFET power supply, with rated efficiency of 76% at 2 ohms and 85% at 4 ohms. Its 10.43-inch-long chassis fits into smaller installation spaces; check available clearance for the amplifier, wiring, and terminal covers before mounting. Thermal, short-circuit, and over-voltage protection provide safeguards against operating faults. Specifications Type: four-channel Class D marine amplifier Dyno-certified continuous output at 2 ohms stereo: 175W RMS x 4; 700W RMS total Continuous output at 4 ohms stereo: 115W RMS x 4 Continuous output at 4 ohms bridged: 350W RMS x 2 RMS power test conditions: 1kHz, 1% THD+N, 14.4 VDC Rated efficiency: 76% at 2 ohms stereo and 4 ohms bridged; 85% at 4 ohms stereo Peak output: 700W x 4 at 2 ohms; 460W x 4 at 4 ohms; 2,800W system peak Frequency response: 5Hz–45kHz (±3 dB) Distortion: under 0.03% THD+N at 1W RMS, 20Hz–20kHz Signal-to-noise ratio: 73 dBA, referenced to 1W RMS into 4 ohms Stereo separation: -56 dB at 5kHz Damping factor: 64.88 Input sensitivity: 224 mVrms–6.00 Vrms Crossover modes: full range, low pass, and high pass Adjustable low-pass and high-pass filter range: 50Hz–250Hz Operating voltage: 9–16.1 VDC Idle current draw: 1A Fuse rating: 80A total, with four 20A internal fuses Power and ground terminals: 4 AWG Speaker outputs: 10 AWG Power supply: high-speed MOSFET Protection: thermal, short circuit, and over voltage Dimensions (L x W x H): 10.43 x 4.92 x 1.81 inches In the Box MRDF-4 marine amplifier White silicone terminal covers Mounting hardware Owner’s manual Spare fuses
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$129.95