
$149.95
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
Add dedicated subwoofer power to your boat's audio system without giving up much installation space. The Rockville MRD1000.1 is a white Class D mono amplifier with a 12-inch-long chassis and a dyno-certified output rating of 1000 watts RMS at 1 ohm. Its continuous power ratings also include 700 watts RMS at 2 ohms and 420 watts RMS at 4 ohms. A conformal-coated circuit board, UV- and salt-resistant aluminum alloy chassis, and sealed terminals support marine installations. Included white silicone terminal covers fit around the connected cables, with removable caps for unused RCA terminals. These protective features do not establish a waterproof rating. Set the low-pass filter between 45 and 200 Hz to shape the frequencies sent to your subwoofer, then adjust the 10–50 Hz subsonic filter to suit your enclosure. Bass boost provides 0–12 dB of adjustment at 45 Hz, while the adjustable input level helps match the amplifier to your source unit. The included white metal bass remote puts level adjustment within reach of your listening position. Its power and clipping indicators help you monitor the amp as you adjust bass between tracks. Tiffany-style RCA connections and a preamp line output provide connections for your source and additional amplification, while 4-gauge power and ground terminals and 10-gauge speaker terminals accommodate the wiring. Connections and ControlsThe amplifier includes power, protect and clip indicators, IC-controlled protection circuitry, and a mute-and-delay soft-start system. Match the subwoofer wiring to the amplifier's rated impedance loads and plan the power supply around the stated current requirements. The RMS ratings below are specified at 50 Hz, 1% THD+N and 14.4 VDC; peak ratings are listed separately and are not continuous output ratings. Specifications Type: marine/boat Class D mono amplifier, white Dyno-certified continuous RMS power: 1000W at 1 ohm; 700W at 2 ohms; 420W at 4 ohms RMS rating conditions: 50 Hz, 1% THD+N, 14.4 VDC Efficiency at rated test conditions: 73% at 1 ohm; 84% at 2 ohms; 87% at 4 ohms Peak power, one channel: 4000W at 1 ohm; 2800W at 2 ohms; 1600W at 4 ohms Construction: conformal-coated PCB, UV/salt-resistant aluminum alloy chassis, sealed terminals Power supply: high-speed MOSFET Built-in fuse rating: 100A total, four 25A Maxi fuses Bass boost: 0–12 dB at 45 Hz Low-pass filter: 45–200 Hz Subsonic filter: 10–50 Hz Adjustable input signal voltage: 264 mV RMS–8.0 V RMS, measured at 4 ohms RCA preamp line output: Tiffany-style terminals with 8V preamp circuitry Power and ground terminals: 4 gauge Speaker wire terminals: 10 gauge Protection: IC-controlled circuitry; mute-and-delay soft start Indicators: power, protect and clip on amplifier; power and clip on remote Remote level attenuation: 0 to -26 dB A-weighted signal-to-noise ratio: 82 dBA at 1W RMS into 4 ohms; 105 dBA at 400W RMS into 4 ohms Frequency response: 10–193 Hz, ±3 dB Damping factor: greater than 150 at 100 Hz Operating voltage: 9–16 VDC Maximum current draw: 103A at 1 ohm, 50 Hz THD+N: less than 0.1% at 1W RMS from 20–250 Hz Dimensions (L × W × H): 12 × 4.9 × 1.8 inches In the Box Rockville MRD1000.1 marine Class D mono amplifier White metal bass remote with clipping indicator White remote cable White silicone terminal covers Removable RCA terminal caps Stainless steel mounting hardware
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$149.95