Flexible Mount for 100W Flex Panel

Mount your Shade Stopper 100 Watt Flexible Solar Panel to flat or curved surfaces with this kit. It includes a custom flexible vented backer designed to keep the panel cool for optimal efficiency. The kit also features no-drill fasteners, ensuring a strong and secure bond without the need for drilling into the mounting surface. The vented backer is a custom-cut piece of corrugated plastic with double-sided foam tape around the perimeter that sticks to the panel and acts as a gasket to prevent wind noise & drag on a vehicle. The back side of the vented backer features more heavy duty double-sided foam tape that will adhere to the mounting surface, as well as prevent lift by blocking wind from flowing under the panel. The backer can flex so you can mount it on a curved surface.  When applied following the instructions, these will hold your panels in place for as long as you need.  This kit is ideal for mounting your flexible panel to an RV, van, or the roof of a shed or fixed structure. Backer dimensions (inches): 21 x 44½ x 5/16 The backer is exactly the same length and width as the flexible panel. It will add 5/16 of an inch to the panel depth. What’s in the Box: (1) Vented backer (custom cut piece of corrugated plastic) (6) No-drill fasteners with nuts and washers (bolts that attach with very high bond double-sided tape, strong enough for vehicle mounting, weatherproof zinc-coated steel) (6) Isopropyl prep pads (to prep surface for double-sided tape) (1) Cleaning pad (to prep surface for double-sided tape)