Mountable Vacuum Hose Clips 4pk

Securely mount vacuum hoses virtually anywhere in the shop with these mountable hose clips! Perfect for storing hoses in space otherwise unused and general shop tidiness. Each style of hose clip is carefully designed to fit each specific hose type. If hoses have ridges, the clips have ridges to match. If hoses have coils, the clips have matching coils specific to the coil size and spacing. Not only does this make for a perfectly snug fit but also ensures that hoses can be mounted in any orientation, including upside down, and can’t be easily slid if tugged on. Clips are 1-1/2" wide and have two mounting holes. REGARDING FESTOOL HOSES: Please confirm which style hose you are working with. Standard Festool antistatic hoses come in a few versions: 36mm, 27mm, 36/32mm and 27/32mm. Outside measurements of these hoses are as follows (measurement is of the outside of the hose itself and not the hose cuff): 27mm: Roughly 1.38" or 35mm along the entire length of hose. 27/32mm: Roughly 1.61" or 41mm at the extractor end, and 1.38" or 35mm on the tool end. 36/32mm: Roughly 1.85" or 47mm at the extractor end, and roughly 1.61" or 41mm at the tool end. 36mm: Roughly 1.85" or 47mm along the entire length of hose. Please keep in mind that tapered, or conical, Festool hoses (27/32, 36/32) are the larger of the two measurements roughly 2/3rds of the way down on the extractor end of the hose and then start to taper into the smaller measurement. Clips for tapered hoses will ship with three larger diameter clips and one smaller diameter clip. More hose clip sizes will be added periodically. Have a request for a certain hose? Reach out to us via the contact form and we will see what we can do! 3D printed with PETG filament.