Motogadget Inductive Proximity Speedo Sensor M5

This inductive proximity sensor can be installed as an alternative speedometer sensor replacing the need for the use of the magnet / reed sensor that is included in the original kit. This can be pointed a large rotating metal part within the wheel and will sense it's speed. Think brake rotors and mag wheels. It is also possible to use the teeth of a sprocket or gear, basically any metal object that will pass by the sensor as the wheel rotates. These proximity sensors can also be a viable solution to replace incompatible factory speed sensors while maintaining the original mounting location, some custom fab required.  Please check your manual to see what your gauge requires: NEGATIVE/GROUND signal - This is the most common one used with newer Motogadget instruments. POSITIVE signal - (Positive Signal has been discontinued from Motogadget) This is very rarely used and is for use with older Motogadget instruments manufactured prior to about 2012, double check the manual and the gauge serial number.  M5 threading 25 mm length 2 nuts included Cable length 150 cm Please check your manual to see what your gauge requires: NEGATIVE/GROUND signal - This is the most common one used with newer Motogadget instruments.