MOTOBILT BOBBED REPLACEMENT BED KIT - BARE

***Note: Some images show the replacement bed powder coated black, product is raw steel.***   Approach and departure angles are vital in off-roading.  The factory configuration of the Jeep Gladiator is great for some applications but when it comes to rock crawling the factory Jeep Gladiator Bed overhangs the back of the Jeep and often drags on many obstacles. Since the release of the Jeep Gladiator 2020 model in 2019, owners have cut and bobbed the factory bed to improve departure angle. Cutting the factory bed is not a weekend project to do on the driveway.  Often it requires an Offroad professional body shop to shorten the factory Gladiator bed and, even with the factory bed bobbed there are durability issues with the taillights and thin sheet metal.  Motobilt has designed and manufactured the world’s first production full replacement bobbed bed kit for the Jeep Gladiator. The bed is constructed of heavy-duty steel, eliminating the need for additional body armor.  The Motobilt bobbed bed is the body armor for the Jeep Gladiator.  We tucked the taillights in to prevent them from being broken when you get into big rocks or trees. The Motobilt Bobbed Bed Conversion for the Jeep Gladiator comes with just about everything you need to make the swap at your home.  Basic hand tools can perform the Motobilt Bobbed Bed Conversion.  Below you will find a list of what is included in the kit as well as features and benefits. Kit includes: main bed sides, floor panel, bulkhead, and tailgate; each laser cut, formed and welded from heavy duty 3/16” steel plate for maximum strength. The inner fenders are fabricated from 11ga steel plate to provide additional gusseting and support adding to the overall strength.  The bed was designed to take a beating when off-roading.  We have also provided mounting points for those wanting to build custom roll bars on the fender tops. The fenders and bumper are also constructed from laser cut 3/16” thick steel plate for ultimate durability.  Features… the kit is packed with features for both functionality and form. Building a functional product sometimes lacks in form but we wanted to ensure the bobbed bed kit both worked well and looked great. The top bed rail features a slotted bolt hole pattern to allow for many options to be bolted to it easily. For instance, our cargo baskets will bolt on.  You can also directly bolt on lighting for off-roading or the campsite. The steel corners are formed up and over to provide strength for side impacts while adding a stylish bed rail. The tailgate holds your license plate and folds down. The kit includes flush latches, hinges, cables, and rubber bumpers. The taillights are recessed into the corners for extra protection. We include round pop-in style taillights with reverse lights. Additionally, including in the kit are provisions to mount Max-Bilt or Offroad Only surface mount LED taillights. The taillight mount also provides a place to mount additional lighting of your choice. We recommend using the Baja Designs Squadron cubes. Both the taillight and accessory lighting are trimmed with aluminum bolt-on rings. To ensure ultimate strength for side loads on the bed we have fabricated bed supports and a full-length cross member to take all of the flex out of the bed structure. The stock Gladiator frame is trimmed approximately 14-5/8” and the total savings in length is approx. 18 inches versus the factory bumper and factory bed. The kit ships to you disassembled and in raw steel form.  You will need to paint and assemble the bed during the install process.  You can either assemble it and then have it painted or you can have the parts painted individually and then assembly.  We chose to assemble ours completely and then paint to reduce the chance of scratching the fresh paint when installing the new bed. We highly recommend the assemble and then paint method.  What’s Included: Complete Motobilt Bobbed Bed Kit for Gladiator Tailgate Kit including latches, lanyards, hinges and aluminum license plate trim bezel Tail Light Mount Kit with aluminum trim bezels Round LED pop in tail lights Resistors for factory non-LED tail lights 3/4” LED Side Marker Lights for those who need them Off-road Only License Plate Lights / Third Brake Light Relocation Parts for factory fuel filler neck Roll Bar Plates for inner fenders Bed Stiffeners Front Cargo Tie Down Points Backing Plate for front Motobilt logo cutout Rear Bumper with sensor provisions and backup camera mount Rear Bumper Frame Mounts Rear Fenders Block Off Plate for Gladiators not equipped with 120v bed plug All Hardware needed for assembly and install  Features: Bolt-on Installation (no welding required) 18” shorter overall (including bumper) than factory Drastically increased departure angle Heavy duty steel construction Fold down tailgate with automotive grade cables Rattle free adjustment latches with integrated rubber bumpers Recessed LED taillights with reverse lights included Mount for rear facing accessory lights Recessed License Plate  Rear Camera Mount Uses factory fuel filler neck and cap.  No emissions concerns as the fuel system is not modified. Aluminum trim bezels around taillights and license plate for a custom look Rear Bed Stiffeners with tie down points  Forward tie down points to secure your cargo Integrated Slots along top bed rail to bolt on accessories Larger wheel openings for large diameter tires Heavy duty bolt on fenders Heavy duty bolt on rear bumper Rear bumper integrates rear parking sensors Mounting plates for those wanting to fabricate a roll bar or headache rack Bolt on zip tie tabs to help arrange wiring 19.5 cu ft of storage space under the bed rails Complete assembly / install instructions  Specifications: Weight (Bed) 420 lbs Weight (Fenders) 35 lbs Weight (Bumper and mounting brackets) 70 lbs Dimensions (Bed Exterior) 48.3” L x 64.5” W x 16.6” H Dimensions (Bed Interior) = 45.6” L x 40.6” W x 14.9” H Cargo Capacity 19.5 cu ft   NOTE:  This is a permanent modification to your vehicle.  The factory frame will be shortened.  Check your local laws & insurance company before making modifications.  This system is NOT compatible with optional factory taillight blind spot sensors.  You can turn off the rear taillight blind spot features using a programmable Tazer.  The rear bumper is compatible with the factory rear park assist sensors.  This kit does NOT provide any provisions for towing.