Moose Knuckle XL Shackle 3/4

This Raw Dog uncoated custom color and color match ready Patented "man shaped" tow shackle has a 10,000 lb work load limit and is designed to make your next tow easier. The unique "B-Ring" shape prevents your snatch or recovery rope from over tightening. A divider on the inside of the tow shackle doesn't allow a slip knot to slide together making removal easier. This divider also helps with keeping space when two hooks, chains or master links are attached. A gap on the bottom outside allows for insertion of a screw driver or pry bar in the event that a slip knot or rope does get tightened into a stuck position. You can easily pry it loose instead of having to beat on it with a hammer. Moose Knuckles are also a great solution to the widely prohibited Truck Nuts and provide a functional yet legal alternative to hanging plastic balls from the hitch receiver of your vehicle. The Moose Knuckle XL fits any 2.0 or 2.5 inch D-Ring tow shackle receiver hitch bracket mount with a 7/8" (0.875") pin hole and a mount width of 1-1/4" (1.25") or less. PLEASE NOTE: A very popular bumper mount hole inside diameter is often listed on bumper specs information as 1.0 inch. Many manufacturers use this common bore size when machining their mounts. However, after coating the entire bumper including the inside of the mount holes with thick textured or powder coatings this added thickness decreases the inside diameter of the holes well under 1.0 inch, down to around 0.950in, making the hole size too small for a 1.0 inch pin. In most cases a 1.0 inch diameter hole is intended for a 3/4 size shackle that has a 7/8” (0.875in) pin diameter. If your bumper has 1.0 mount holes please refer to our VEHICLE SIZE RECOMMENDATION GUIDES for further assistance. All color options are fully covered with a durable coating pantone color matched to popular truck and Jeep colors. Sold as single shackle. Black Hole - RAL 9005 Gun Gray - RAL 7015 Pure White - RAL 9003 Grape Escape (Purple) - PSS-1676 Blue Balls - RAL 5005 Sublime Green - RAL 6018 Detonator Yellow - RAL 1023 Obscene Orange - RAL 2009 Flame Red - RAL 3020 Pretty Pink - RAL 4003 Pogo Pink - RAL 4010 Nice Gal - Galvanized / Nickel Coated Brass Knuckle - Yellow Zinc Plated Buff Bronze - UMB-4548 Raw Dog - Uncoated (See warning below - will rust if left uncoated) This "Raw Dog" uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing. Class 6H/6b (2A and 2B equivalent) thread tolerances between the pin and body allow for the addition of these coatings without hindering assembly. (***Please note: this option will show signs of weathering and rust if left uncoated.) Gloss or Satin Clear Powders or Paints can be added to maintain Raw metal appearance to prevent rusing and corrosion. Specs: Item: 3/4 Screw Pin Anchor Shackle Color: Raw Dog (Uncoated) Pin Style: Screw WLL: 10,000 lb. Width Between Ears: 1-1/4" (1.25") Finish: Uncoated (Ready for Powder or Paint) Pin Diameter: 7/8" (0.875") Thread Size: M22 x 2.5mm - 6H/6g Pin Material: Carbon Steel Body Material: Carbon Steel PATENT No. D953,845, No. D986,043 Manual: XL B-RING Recovery Shackle 3/4 Read First Instructions Manual: Raw Dog Custom Color Coating Instructions Resource: B-Ring Screw Pin Anchor Shackle Vehicle Size Reference Guide 15% Off when you purchase a Shackle Receiver Combo Today! Click Here More Specs and Dimensions View Other Color Options